Where can I find underbody/ frame/ and underhood measurment specs? Does anyone have access to one of the frame measurement books like a bodyshop has? Can you scan it and post it? I need more than the ford shop manual has.
fox mustang body measurements
2 reading
Johnie Ryall
21 - 40 of 44 Posts
Joined
·
3,870 Posts
lol i have the same 1
Joined
·
290 Posts
could I possibly get these sheets for an 88 coupe?
Joined
·
173 Posts
Looking for the engine compartment measurements for a 5.0 '91 coupe. Passenger frame rail is tweeked, are there measurements for the frame rails?
I saw the pic of the '90 hatch measurements, is it the same as the '91?
Thanks
I saw the pic of the '90 hatch measurements, is it the same as the '91?
Thanks
Joined
·
302 Posts
PM your e-mail address to me. I have what you need and i can send them to you.
Joined
·
173 Posts
Joined
·
1 Posts
I'm here for a friend of mine. He just picked up an 89 notch back. The car was driven into a river and pulled out with a crane and a big chain through the windows. The roof was pinched at the sides.
Would those crash sheets have the specs for the roof?
If so could someone send me a copy of the messurments?
Thanks
Would those crash sheets have the specs for the roof?
If so could someone send me a copy of the messurments?
Thanks
Joined
·
302 Posts
PM sent.
Sorry to bump an old thread, but does your frame book have straight on measurements on the core support. Someone hacked mine just below the rails and I have another piece to go back. I want to make sure all the measurements are right and it gets welded in straight.
Joined
·
302 Posts
PM your email address to me and I will send you what I have for your car. I don't know if it is what you will be looking for. If not those measurements are probably not published. The next best thing then would be to get them by measuring a known good car.
Joined
·
1 Posts
Hello,
I recently acquired an '87 LX 5.0 and it has been T-boned in the pass door including the A and B pillar. I want to stretch it back so I can get a new door into it and make it as rain proof as I can. So any info/measurements would be greatly appreciated!!! Thanks. MV
I recently acquired an '87 LX 5.0 and it has been T-boned in the pass door including the A and B pillar. I want to stretch it back so I can get a new door into it and make it as rain proof as I can. So any info/measurements would be greatly appreciated!!! Thanks. MV
Joined
·
1,008 Posts
Joined
·
4,637 Posts
Would this be the same on a 81?
Does anyone have the underbody measurements for an 81?
Thx
Does anyone have the underbody measurements for an 81?
Thx
Joined
·
1,782 Posts
anything for rear,like between quarters where deck lid meets
Joined
·
1 Posts
More Info needed..
Hi all!
My name is Per and I live in Sweden.
Just bought a fox body Mustang 1991 GT Hatchback for a uppcomming Project.
Im looking for measurements like the Engine bay drawings in earlyer posts but for upperbody, the innerstructure parts is my focus..
Hope any here have something to share, it would be great!
Thanks for your time!
// Per
Hi all!
My name is Per and I live in Sweden.
Just bought a fox body Mustang 1991 GT Hatchback for a uppcomming Project.
Im looking for measurements like the Engine bay drawings in earlyer posts but for upperbody, the innerstructure parts is my focus..
Hope any here have something to share, it would be great!
Thanks for your time!
// Per
Joined
·
1,407 Posts
You have a PM and mail.
I know this is an old thread but how does 24 3/16 plus 25 3/4 equal the total of 47 13/16?So I made this today if anybody wants it.
![Image]()
At the very bottom of the picture.
Joined
·
1 Posts
Hey I have recently just completely destroyed the two from frame horns in front of the strut towers and was going to rebuild it but with 2x3 rectangular tubing I was needing to see if I could get some demensions of the two front frame horns so I can place my k member back to stock location so I have the stock wheel base as well any info or help would be awesome thanks Chris
21 - 40 of 44 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
