What year do you need? I should have them. Let me know and I will see what I can do.

 

I have them too, I measured every point that I could before investing my 20's and a lot of money into my car!

 

Do you have the 1999 Mustang base coup?

 

let us know what ya need.

 

what about for a 1986?

thanks.

 

I have it for the 86, I will have to wait and scan it at home tonight.

 

thanks for the help..

 

I have a wrecked 91 conv. but i would like any 79-93. i would think they are almost the same. Im cutting out rear rails and welding them into my 84 conv, and i will be doing alot for front end cutting/ welding on my 88 SSP notchback.

 

I'm sorry, I left the photo copy at work, I will have to get it posted tomorrow. As for the convertibles, there are some differences I will see about getting that tomorrow as well.

 

can I get a copy of this too?

 

I would like the measurements also. The engine compartment/front fram rails mostly. Thanks

 

here is the engine compartment

 

that is awesome! I didn't know such documents even existed. Thanks!

Now, Im almost too scared to go measure my car.

 

Wow, I never realized they were 1/4" wider in the back versus the front.

 

I have 4 sheets but I cant get them to load in gallery so if you want them send me your email address and I will send them to ya

 

I have 4 sheets but I cant get them to load in gallery so if you want them send me email and I will send them to ya

PM sent! thanks!

 

I have the under hood and frame for an 86 and I have the frame and upper body/under hood for a 90 coupe/convertible. If you would like them PM me your email address and I will send them to you, they wont load good in the gallery. The actual sizes that these are copied from are like 11X17 so these are shrunk down to normal 8.5X11 but they read well. Let me know.

 

I should mention I have most years from 83 to 93. I don't have them all with upper body though. All years from 79-93 should be pretty close to the same with maybe some minor changes. They do have separate spec sheets for coupe/convertible and hatch. Let me know if there are others you would like.

 

sorry to resurrect such an old thread, but what book is that? and where can i get one?

 

They are the frame spec books we would get, updated every year. We got them by subscription which runs about $1000.00 bucks a year. Several different companies such as KLM, Mitchell, Chief, etc.... They have all the cars foreign and domestic. I don't get the books any more as we have switched to a computerized laser system. But I have books that go back to the late sixties.

 

lol i have the same 1

 

could I possibly get these sheets for an 88 coupe?

 

Looking for the engine compartment measurements for a 5.0 '91 coupe. Passenger frame rail is tweeked, are there measurements for the frame rails?

I saw the pic of the '90 hatch measurements, is it the same as the '91?

Thanks

 

PM your e-mail address to me. I have what you need and i can send them to you.

 

I'm here for a friend of mine. He just picked up an 89 notch back. The car was driven into a river and pulled out with a crane and a big chain through the windows. The roof was pinched at the sides.
Would those crash sheets have the specs for the roof?
If so could someone send me a copy of the messurments?
Thanks

 

PM sent.

 

Sorry to bump an old thread, but does your frame book have straight on measurements on the core support. Someone hacked mine just below the rails and I have another piece to go back. I want to make sure all the measurements are right and it gets welded in straight.

 

Do you have measurements for the headlight side of the front end for an 89 GT?

thanks for getting that info out here.

 

PM your email address to me and I will send you what I have for your car. I don't know if it is what you will be looking for. If not those measurements are probably not published. The next best thing then would be to get them by measuring a known good car.

 

Hello,
I recently acquired an '87 LX 5.0 and it has been T-boned in the pass door including the A and B pillar. I want to stretch it back so I can get a new door into it and make it as rain proof as I can. So any info/measurements would be greatly appreciated!!! Thanks. MV

 

Where can I get a better scan of that engine compartment measurement image?

So I made this today if anybody wants it.

 

So I made this today if anybody wants it.

I know this is an old thread but how does 24 3/16 plus 25 3/4 equal the total of 47 13/16?

At the very bottom of the picture.

 

Would this be the same on a 81?

Does anyone have the underbody measurements for an 81?

Thx