the connectors are different. what exactly are u trying to do?

 

I have a SN95 setup in my 65 and I have a 93 harness. Trying to not have to sell my TB and buy a 93 version if possible.

 

so u would have to change the connector on the tps. just buy a fox tps and switch it over. this is funny considering alot of us sn95 5.0 guys switch over to a fox setup, myself included.

 

Does the 93 tps fit? What about the other connectors...IAC, EGR, etc?

 

ok, i think we have some confusion here. your running a 93 style harness with a 94/95 style t/b with a 94/95 tps, correct? the 94/95 style tps wont plug into a 93 style harness so what u could do is buy a 93 style tps, cut the end off and connect it to the end of the 94/95 tps so this way it will plug into the 93 style harness. make sense?

 

That makes sense assuming that the 93 tps will bolt up to the tb. Has this been done before?

 

the 93 tps wont bolt to a 94/95 style t/b so u need to cut the connector off of the 94/95 tps, buy a 93 style tps and cut the connector end off of that and wire it to the 94/95 style tps. why not ditch the 94/95 setup and just run a 93 style t/b setup?