Ford Mustang Forums banner
Cancel
Create thread New Garage Forums

want to trade for a charger

Jump to Latest
388 views 7 replies 4 participants last post by  mnt88 gt  
M
#1 ·
i have a trick flow track heat upper and lower intake thats ported with a professional products power t-body and egr spacer with egr and tps on them and a set of edelbrock performer heads i want to trade for a charger.the heads were ported and stamped by RHINO RACING in mi............ford 302/351 RPM 6025 heads ported and flow 293/200 by al from RHINO RACING with stainless 2.02/1.60 valves and hyd roller springs good to .600 lift.i got these heads from a friend to put on my stang.after i sent them out and had them gone through there ready to go minus the locks on 1 head.1 head needed to be cleaned up a little but i didnt want to reuse the locks..........i have a 88 gt that im changing over to mass air.i didnt want to get into bigger cams ect so i can drive out of town if i wanted to with out problems,thats the reason i dont want to use this set up.i want to trade for a supercharger that fits a 87 to 93 5.0 mustang.the heads have about 2000 miles on them.the port work,valves,springs have about 500 miles on them.i live in roseville,mi .all the valves,springs ect are in a box.im new so it wont let me put pics up or a url:rolleyes: so ill email pics intill i can put them up.thanks
 
M
#3 ·
i thought i could use the heads but found out i need to cut the pistons so the valves dont hit and the cam i have is way to small(b-303,480 lift).i got all this thinking i can bolt everything up with out having problems and everyone is telling me now after i got all this that my cam is too small and i need to cut the pistons.i have 2 slipped disk and a pinched nerv in my neck so my go fast days are over,i only get so much money a month and dont have the money to put in the car to have the pistons cut and a bigger cam and on top of that ill still need rockers,studs.so if someone has a good working charger ill trade them.im even willing to drive a little..
 
S
#7 ·
might have something for you...
 
Save
Like Like
You have insufficient privileges to reply here.
Ford Mustang Forums
posts
9.8M
members
208K
Since
2001
A forum community dedicated to Ford Mustang owners and enthusiasts. Come join the discussion about performance, production numbers, VIN decoders, modifications, troubleshooting, power adders, DIY tutorials, and more!
Full Forum Listing
Explore Our Forums
5.0/5.8 Engine Tech General Mustang Tech Windsor Engine Parts GT & SOHC Engine Tech 94/95-Specific Windsor Engine Tech