Old car didn't have coil overs. Just the plates with Eibach lowering springs.

 

I have Team Z caster camber plates and strange 10 way adjustable coil overs; my front end it super loud with clunks. I'm currently doing some research and will call Team Z to figure out a fix. It seems the springs makes noise against the bottom of the caster camber plate. Not pleasant to drive around with for sure.

 

^^^ same set up. No noise.


Sent from my iPhone using Tapatalk

 

My car has MM K-member w/ Delrin bushings, MM CC plates & MM Bilstein coilovers. No more nose than stock. A little harshness from revalved Bilsteins & high rate springs though.

Sent from my SCH-I500 using Tapatalk 2

 

i have team z caster camber plates with 90/10 shocks and i don't have any noise

 

Team Z CC plates with Strange coilovers and no noise.

 

I've got the Upr and wrapped some electric tape around the shock and the car rides quiet as a mouse.

 

I have no noise with my team z. Just make sure the top spring mount is not hitting strut tower.
Tim

 

Strange did have an issue with some clunking noises comming from their struts!

 

Did they fix this issue? I just received my front and rear Strange coil overs so hopefully its not an issue anymore...

 

I have teamz cc and strange struts(struts bought prob 5-6 years ago ?). 12" hypercoils. I have a clunking noise!! Be nice to get rid of it!!

 

i have upr kmember and a-arms with coilover kit and lakewood 90/10s and maximum motorsports camber plates and mine are quiet and smooth as factory

main thing u gotta make sure u have the spacers right so the coilover cap doesnt rub or hit bottom of camber plate

 

I just ordered my new Team Z K member and A-arms. I'll be pulling the coil overs and caster/camber plates apart to inspect.

 

After having my front end apart for the past two weeks and looking over each and every piece, I believe the "clunk" issue has been found. The spherical bushing in the drivers side caster camber plate has some "play" in it. These are brand new with less than 200 miles on them; I'll be calling Dave on Monday to see what can be done.

 

Mine has same issue

 

im running strange struts with UPR plates and no noise here that i can hear over the exhaust

 

Im a little bummed,i had issues with the rear Team Z springs,And the caster plates from team Z

 

I bought the strange 6001 coilover sleeves and hypercoil 12" 225# springs hoping they will fit on these stagg ebay struts I bought a while back, which have a bigger shaft diameter than the stock struts if they don't work I'll just buy strange struts. I am wondering what cc plates to use thinking about using the strange plates not sure....
Called strange they told me the strut shaft is oem size but didn't specifically say the diameter and strut body diameter is 2.211 with power coating they said to me over the phone when he went to ask his engineers. there coilover sleeve is 2.2 ID and my stagg strut is 2.205 strut body diameter and a 21.95mm strut shaft. So the strange coilover sleeve should fit with a little sanding. I will comment back when I get everything together to let you know how it rides.