stocker FTW! :rofl:

i bought a new B&M hammer, installed it, worked it thru the gears, took it out and reinstalled the stocker! those SUCK! i didnt even finish installing the console!



111_6214 | Flickr - Photo Sharing!

 

TTT

 

I've got the hammer shiftier to.. takes some getting use to.. but its nice.

 

i had a b&m hammer with a c4 in my first car and liked the looks a lot, but was not a fan of ratcheting to drive all the time. looked sharp, clean install, but was a pain to work with.

 

You dont need to use the ratchet function of the shifter unless you have a manual shift c4 in which case you would have to manually shift it anyway .

To the OP I use a B&M quicksilver with a reverse manual c5 I love it in my 85 capri I used the console it came with will add a pic later today .

 

Stocker with a 5 speed shift boot over it! Looks really clean and hides the cheezy indicator and whimpy looking stick.

Sent from my DROID RAZR using AutoGuide.Com Free App

 

i like my whimpy stick... its stealthy. :king:

 

 

the B&M prostick above work out good in the 5 speed boot...

 

Agreed very clean!

Sent from my DROID RAZR using AutoGuide.Com Free App

 

hurst quarter stick ftw

 

The thing I don't care for with the Quarterstick is how close to the dash it sits in Park. I guess if I can still get behind it it's ok.

 

Here is how mine is in my car. The previous owner had his shifter mounted here so I fingered I would try it out first. I like this much better than in the original shifter location. My other car was set up like that with the boot covering the shifter. For me it was not as comfortable comfortable as the way I have it set up now.

Sent from my SGH-T989 using Tapatalk 2

 

When you use the Quarter stick do you have to get the aod bracket from them too that mounts to the trans? I am doing a 4r70w swap in my fox body and I need a shifter. I have the stock cable from the 4r70 trans can I use that or do I need the cable that comes with the quarter stick?

I like the look of the quarter stick in the 5 speed boot.

 

B&M Hammer Shifter

Car was originally 5-speed so the shifter ended up sitting about an inch higher than it should so I made a spacer for it. Works great.

 

1/4 stick.

 

No center console

Quarterstick:

 

Shifter do you have a pic from the rear seats looking forward? I'm kinda digging that look.

 

I don't have one handy, but I can take one.

 

tci outlaw in my car with an AOD. love it. probably my favorite thing i ever did to the car.
i'd like to get a plate machined to cover the hole but for now i'll keep the 5 speed boot on it.

 

Bump, lol. Any others?

 

Hammer shifter. It's ok but a little sloppy imo

 

Nice thread,been thinking about the same thing.Think the quaterstick is what i will go for.

 

Hurst quarterstick in ash tray location.