Since summer has only 8 days left, I felt the title was appropriate.
Indy Hangout XXXIV - Summer's Over?
OneBad93LX
1,461 - 1,480 of 3,502 Posts
Joined
·
6,950 Posts
Joined
·
6,950 Posts
Oh and just got a late surprise! A craftsman aluminum jack with leds in the plate.
LT
Joined
·
16,645 Posts
Prince Caspian?? okay
---
Looks like everyone did well.
Went to the movies yesterday with about everyone else in the state. Uh if you have had a passing of a pet in the past couple years. Uh Marley and Me is a rough movie for the kids and wives. The xmas dinner afterwards felt more like a dinner after a funeral.
---
Looks like everyone did well.
Went to the movies yesterday with about everyone else in the state. Uh if you have had a passing of a pet in the past couple years. Uh Marley and Me is a rough movie for the kids and wives. The xmas dinner afterwards felt more like a dinner after a funeral.
Joined
·
6,423 Posts
The twin carbon/carbon disk lightweight clutch and adjustable master cylinder should take of that. :leghump: :drool: (Finally figured out what was preventing the shift from happening).
Plus I have been practicing on my virtual shifting simulator. :rofl::rofl::rofl:
Joined
·
16,645 Posts
Joined
·
139 Posts
I'm gonna try to get it fixed.
Anybody have any experience with getting a rim fixed? Jason said somethin about a place called Mr. Wheel.
Joined
·
3,923 Posts
I have used him before. They do nice work. Might be worth looking into what a new rim will cost since yours are chrome. I used them 8 years ago on a polished rim and it was $150 to have it fixed. Had the rim needed painted or plated it would have been much more.
Joined
·
3,396 Posts
would this Mr. Wheel be able to fill in a gouge on backside of a wheel? When I got those 15x10 prostars for the Cobra, I did not know they would not clear the rear calipers. I hopped in the car, pulled out of the garage, and found the smal pile of aluminum shavings on the ground.
Joined
·
16,645 Posts
If not steves got a number to a guy who does amazing work. He filled a hole on the outer dish and you couldn't even find it afterwards.
Roush wheels are not cheap, unless you can find one used. Looking at $500 each.
For that price you could buy a whole new set of knock-offs.
Roush wheels are not cheap, unless you can find one used. Looking at $500 each.
For that price you could buy a whole new set of knock-offs.
Joined
·
3,923 Posts
Not sure...
Joined
·
10,188 Posts
Afternoon all and late Merry Christmas.. just got back from Chicago.. wow that was a cluster phuck drive..
Gift list
Vibrating heated house shoes
Ford Sweats
Colts hat
Massage/heated thingie for the car/computer chair
Couple of Hoodies
DVD's
Some Old redlines Hot Wheels..
Gift list
Vibrating heated house shoes
Ford Sweats
Colts hat
Massage/heated thingie for the car/computer chair
Couple of Hoodies
DVD's
Some Old redlines Hot Wheels..
Joined
·
139 Posts
I'm planning on gettin the rim fixed. I just don't know when yet.
Roush rims definitely are not cheap! I don't know if I'm gonna keep the Roush rims or not?
Joined
·
139 Posts
I don't know if I wanna pay for a NEW rim. I know they wouldn't be cheap even if I got them used.
Joined
·
7,117 Posts
Good afternoon all.
Just got done taking the tint off the M45 because it's too dark (limo) and I couldn't see at night and one of the windows had a bad corner. I read on the internet you could use a clothes steamer to get the job done and since I already had one I gave it a try. It worked perfectly. All the tint AND glue came off seamlessly. The tint shop wanted to charge me $150 to remove it and I got it done in 30 minutes.
The M is going in to have the bumper replaced and some other cosmetic procedures on Monday. She will be getting a lighter tint that will be more bearable for night time driving but I did leave the dark tint on the 1/4 windows and back window.
Just got done taking the tint off the M45 because it's too dark (limo) and I couldn't see at night and one of the windows had a bad corner. I read on the internet you could use a clothes steamer to get the job done and since I already had one I gave it a try. It worked perfectly. All the tint AND glue came off seamlessly. The tint shop wanted to charge me $150 to remove it and I got it done in 30 minutes.
The M is going in to have the bumper replaced and some other cosmetic procedures on Monday. She will be getting a lighter tint that will be more bearable for night time driving but I did leave the dark tint on the 1/4 windows and back window.
Joined
·
4,135 Posts
The G8 might make it out of the garage today. I need to vacume it out and clean it up from getting dust on it sitting in the garage. That car is extremely pampered.
1,461 - 1,480 of 3,502 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
