Removing the AC box from under the dash along with the heater core and need to know if anyone sells a piece of aluminum already cut to fit to go over the heater core and evap hole?
ran347nosgt
The guy I bought my shell from just bolted a peice of metal to the inside of the car, put RTV around the seam, and painted over it.... Of course there are two bolt heads you can see in the firewall.... but it doesnt look that bad for being on the cheap. You can just trace the hole onto a peice of paper, and have a fab shop cut it out for you if you dont want too.
I cut some sheet metal and bolted it thru a few pieces of wood on the inside. I used RTV or seam sealer to seal it. It actually did not look bad. When I finally got around to putting my heater core back in (when it got cold out) I almost hated to destroy my nice setup!
Erich
Erich
did mine the long way sice the motor was out.......welded the piece in. Just cut a piece of meatl out. Im sure tstang90 would make you a real nice piece!
![Image]()
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
