As REQUESTED. :lol: :lol: :lol:
Indy Hang Out Part Duex
1 reading
Custom2kGt
- Status
321 - 340 of 2,089 Posts
Joined
·
1,653 Posts
The box just says discbrakesrus.com all over them, the site says made in USA but on the back of the rotors is says Canada, hmmm...jfranci3 said:
Joined
·
1,653 Posts
hmm? Explainjfranci3 said:
Joined
·
3,923 Posts
Darren what time does allof the fun begin on sat?
bob
bob
Joined
·
3,761 Posts
I'll be up and at it early I'm sure. I'm getting a 2do list going. Looking through my ford manual at what all I'll need to do, found a couple of things I wouldn't have thought of. Marking the disc and one of the studs for relocation during installation. Bearing grease (DUHHHH), etc. I'm starting Friday afternoon/night and I'll go from there. Come by any time. It looks like more snow so hopefully you can make it down the road!. Hell hopefully I can make it out.
I don't think I'll be doing the cage this weekend. That's a weekend deal in and of itself. I'm shooting for the front end being done and MAYBE getting the rear springs in. I doubt I'll get to the pan hard bar. We'll see, gotta be running by Monday and still looking to do Gary's install. Anyone got another compressor??? Hehehe Xpipe install 30 minutes,
I don't think I'll be doing the cage this weekend. That's a weekend deal in and of itself. I'm shooting for the front end being done and MAYBE getting the rear springs in. I doubt I'll get to the pan hard bar. We'll see, gotta be running by Monday and still looking to do Gary's install. Anyone got another compressor??? Hehehe Xpipe install 30 minutes,
Well, just make sure enough of us "Yep" men are around to go on parts/pizza runs.Custom2kGt said:
I don't think I'll be doing the cage this weekend. That's a weekend deal in and of itself. I'm shooting for the front end being done and MAYBE getting the rear springs in. I doubt I'll get to the pan hard bar. We'll see, gotta be running by Monday and still looking to do Gary's install. Anyone got another compressor??? Hehehe Xpipe install 30 minutes,
Yeah, frozen Canadian roads don't stress brakes that much. Eskimos don't know anything about rotorsmnypit said:Italy = Brembo
No Italy means no Brembo
Canada means cheapy aftermarket
Sorry!
Steve
I wouldn't worry too much about it. You are just going to be using them on the street. As long as you don't go using super brake pads and slicks, you should be ok.
If not, Brembo rotors are cheap at www.TireRack.com.
Joined
·
1,653 Posts
I am not so sure about installing these brakes myself, anyone recommend any place to do it?
Joined
·
1,163 Posts
It's a piece of cake.. just take it over to Darren's this weekend..:evil:
btw.. what is that logo on your calipers?
I can give you a hand with the brakes if you want..
btw.. what is that logo on your calipers?
I can give you a hand with the brakes if you want..
Joined
·
1,653 Posts
PBR, the company in Australia that makes the Calipers for Fordmineralgsvt said:
For the most part I understand the brakes, but I am just confused as to which way the SS hoses go on.
Joined
·
3,186 Posts
Quick question here... I have tomorrow off, and I need to get my wheels to Indy Powdercoat. IF I am able to get a truck to put the wheels in, will someone be able to lead the way there for me??? Steve knows that I suck with directions/memory. Hell, I see Tom's cell #, maybe I'll give him a ring???
Hell, I see Tom's cell #, maybe I'll give him a ring???
Joined
·
1,653 Posts
Isn't it right behind Kenny Brown?Calvert2812V said:
Joined
·
3,186 Posts
Yeah, its in that little area, or whatever you wanna call it. Actually, I have a buddy (Camaro driverLByellowStang said:
) that lives just off of County Line Road in a little apartments division. I met up with him last time we went there, but thats been almost a year ago. Actually, I may have to throw the wheels in the Escort or Countour, if possible.Sure, give me a ring anytimeCalvert2812V said:Quick question here... I have tomorrow off, and I need to get my wheels to Indy Powdercoat. IF I am able to get a truck to put the wheels in, will someone be able to lead the way there for me??? Steve knows that I suck with directions/memory.
I know where Kenny Brown is and if the Indy Powdercoat place is right in that area I can find it.I hope
Can't help you with transportation since my little Geo is under a big pile of snow at the moment and our neighborhood is the worst it has ever been. These idiots from the city never come and clean our roads. Those grooves start to freeze over at night and they are hard as rocks. Marci even damaged part of her front end leaving the driveway the other day. Part of her Fenderguard from underneath the wheel well fell off. But it's a Crysler what can you say I am sick of this weather!! If I don't see any more snow in the next 20 years it wont be too soon. ARGGHHH.... I am getting stir crazy in here...
Joined
·
1,653 Posts
Tom, thanks for letting me borrow that Mod Shootout DVD, I'll try and get it back to you next time I see ya
321 - 340 of 2,089 Posts
- Status
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
