Ford Mustang Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter #1
Ok, so I finally got almost all of the kinks out of my car. It's scheduled to go on the dyno next week. Here's my setup..let me know what you guys think. also, any ideas will be greatly appreciated.

92 coupe
347 steel crank, pistons, and rods/ gurdled lower end
8.6-1 compresssion
AFR 185 61cc heads
e303 camshaft
Procharger p600 with 12 rib 14 lb pulley
getting about 12 lbs of boost
trick flow intake with BBK 75 mm tb.
36 lb injectors
mac 2 1/2" exhaust with no converters

I tried matching everything up as well as I could. My only drawback may be the "E" cam. Let me know what you think.
Thanks, Rick
 

·
Registered
Joined
·
7,142 Posts
Assuming you have a fuel system that your combo will demand, IMO, you should be making at LEAST 540rwhp/520tq.
 

·
Registered
Joined
·
163 Posts
with a good tune your going to make a jam load of power. But for the love of that motor, ditch the ecam ASAP. Get a custom grind to maximize that beast. Otherwise, looks like she'll scream
 
1 - 3 of 3 Posts
Top