Ford Mustang Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
2,742 Posts
Discussion Starter #1
ttt
 

·
Registered
Joined
·
3,302 Posts
It is a single pattern cam with .444" lift and 266 degrees advertised duration with approx 115 degree LSA.
 

·
Registered
Joined
·
23,532 Posts
lift= .444, duration int=276 ext=266, overlap=39 deg, lobe center int=116 ext=115. Figures from 'The Official Ford Mustang 5.0 Technical Reference & Peformance Handbook'. These cam specs are slightly different from 87-88 HO to reduce valvetrain noise but at a cost of est. 3 HP
 

·
Registered
Joined
·
101 Posts
Anyone know the specs of a stock 86 ho cam? I am not sure if I want to use it in m motor I am rebuilding.
 

·
Registered
Joined
·
23,532 Posts
same as above except, duration int&ext=266, overlap=36 deg,lobe center int&ext=115.
 

·
Registered
Joined
·
3,302 Posts
Ryan99 said:
Anyone know the specs of a stock 86 ho cam? I am not sure if I want to use it in m motor I am rebuilding.
You probably won't be able to tell the difference in the performance of each cam anyways, since the specs are so close. Just use the one with the least mileage and /or best condition.
 

·
Registered
Joined
·
2,742 Posts
Discussion Starter #7
What would be a good cam for a 351W with 1.7rockers and ported GT-40 heads? I dont want it to sound like a popcorn machine either and it has to pass emissions.
 

·
Registered
Joined
·
2,742 Posts
Discussion Starter #8
ttt
 
1 - 8 of 8 Posts
Top