Ford Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I Just Got my Track heat heads the other day and need to order a cam today. Since the TFS stage one cam is back ordered, I was thinking about


Motorsport E-cam, but not sure if I should get 1.6 or 1.7 roller rockers.

I have also heard about the Lunati 51025 or crower
15511, but these cams are 250 + dollars.

Any help from Trickflow users would be greatly appreciated.

My setup is

A-trim stock pulley
cobra intake
tfs track heat heads
all other bolton goodies
 

·
Registered
Joined
·
5,025 Posts
Not a cam guru, but look into the lunati 51014 cam, its very similar to the TFS stage 1. Its a 221/223 duration @ .050 and .509 lift both sides. 112 LSA. I'd stay away from the E303 when there is so much other stuff on the market.
 

·
Registered
Joined
·
2,395 Posts
I agree...don't settle when there is newer technology out there. Like was suggested look for a split duration cam. If it's not imparitive maybe just wait for the Stage1 to be back in stock....I couldn't be happier with mine
 

·
Registered
Joined
·
90 Posts
If you got the track heats I would go with either the TF stage 2 or a F303 cam with 1.7's.
 
1 - 5 of 5 Posts
Top