Ford Mustang Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,285 Posts
Check out Joe Lynch's site. He has a GREAT method for breaking the old shifter loose with channel-lock pliers.

http://www.lx.net/jlynch/shifter.htm

To me, the hardest part was removing the center console. Some say they have changed their shifter with the console in place, but my hands are too fat and stubby for that. I found that the trick is to pull like hell on the e-brake to get it as high as possible so you can slip the console up and over. The rest of the install is a walk in the park. Just make sure you don't drop bits of old silicone down into the tranny when you are cleaning it off. Also, I used high temp silicone.

I agree with Custom2kGt, if you can't do this, then you better pay to have your wipers changed as well.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top