Ford Mustang Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
64 Posts
brianblk2kgt said:
never installed a shifter.
I did mine two months ago and I am not really a grease monkey. Like they said the hardest part is removing the stock shifter. Here is how I got mine off. After removing everything remount the stock shifter lever back on the to shifter. With the 4 bolt removed rock the stock shifter back and forth using the handle. It broke the seal on mine pretty easy, don't be afraid if you have to use a little force it will be ok. It took me all of 45min. to put it on. I could probably do it in 20min. now.
 

· Registered
Joined
·
64 Posts
LOL

MikeMustangGT said:


:lol:


Not flaming you - but installing a shifter is very easy - you can so it with basic hand tools. Steeda gives you good instructions. IMO removing the old shifter was the hardest, I just took a short length of 2x4 and give the base 2 good hits - came right out. This is an easy and baisic mod - jump right in and have fun!
[/QUOTE

You know he was being sarcastic don't you? Check his name.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top