SWAP OUT A 302 for a 427W SMALL BLOCK
Join the discussion
Recommended Reading
-
500hp 347ci.
5.0/5.8 Engine TechI just came across this video.. These guys made great power on a stock porno block with shelf parts. Pretty nice.- 2
- 86
-
midnightlaundry · updated
-
Best option for TFI module?
5.0/5.8 Engine TechI was hoping to purchase a genuine 86-93 Ford TFI module, but the dealer informed me they are obsolete. Are the "Motorcraft" ones from Rock Auto, Amazon, and other such sources, comperable to the originals? I saw a few past threads about people purchasing several before getting one that wasn't...- 21
- 681
-
Piston to valve clearance issues
5.0/5.8 Engine TechPutting my combo together and running a little tight on the PTV setup. Stock, untouched bottom end TFS170 58cc Custom cam w/ 73925k2tw springs 1.6 RR 9333pt head gasket (0.047” compressed) The checking was done with light springs Exhaust clears by miles, but intake is tight. I did the clay...- 9
- 823
-
Mustang5L5 · updated
-
Rack bushings
5.0/5.8 Engine TechHey guys, I'm trying to tighten up my steering a little bit. I replaced the outer tie rods that helped quite a bit with the loose steering wheel feel. I'm going between mm aluminum bushings and prothane ones. https://lmr.com/item/MM-MMST7/84-04-Ford-Mustang-Aluminum-Steering-Rack-Bushings...- 6
- 120
-
91GTstroked · updated
-
RPM Air Gap 351W efi
5.0/5.8 Engine TechI went looking to see if Edelbrock made an EFI 351W RPM Air Gap intake. They make one for the Holden but nothing for a 351W it appears. Does anybody know if the Holden intake will align with aftermarekt 351W head ports?- 5
- 325
-
tmoss · updated
Join now to ask and comment!