Ford Mustang Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
121 Posts
Discussion Starter #1
My car fell of trailer after just installing complete suspension, items for sale are: eibach drag launch kit with air bag, upper and lower control arms, 50/50 shocks and 90/10 struts. also have flaming rivers manual rack with steering shaft. barry grant 220 fuel pump and barry grant regulator. have a holley 750 carb flowed to 830 cfm as well. have set of racing seats with a 5 pt harness and seat covers. have set of 3.5" welds with tires and 16 x 8" welds with tires for sale. also have a set of 15 x 10" welds with 28 x 10.5" inch slicks with 4 passes. also have an aluminum wing from competition engineering for sale. flaming rivers rack and wing have nev er been installed. also selling 8.8 rear with 4.10 gears, c-clip elim kit, axles and spool. okay for prices, complete suspension with fr rack.....1000.00. for welds with tires(street, not slicks or street slicks)........ 550.00. welds with slicks.....550.00. rack alone......370.00. wing.....250.00. seats w/covers etc......250.00. fuel pump and reg.......300.00. carb......350.00. all parts in Virginia and do not include shipping costs. prefer local sale, but will see. some prices neg. will not be checking emails, so if interested MUST call.....804 761 4891 or 804 224 4173. i am sure i have forgooten items, so if you need something please check with me i probably have or can get it. thanks stangers, DARYL
 

·
Registered
Joined
·
121 Posts
Discussion Starter #2
told you i would forget something, i also have a 468ci bbf short block for sale. it is a 70 block 40 over with trw pistons and cj rods and crank. motor with a dominator and a set of alum. cj heads went 7.20 @ 99.1 in my 2900lb GT. also have set of 1.72 rockers for sale for 125.00. oh yeah motor dynoed 400 hp and 500ft/lbs of torque with a 292 cam. motor was built for street. motor has 2500 miles and 16 passes. asling 1000.00 also have big shot nitrous kit for dominator, plate never used car fell off on way to install, asking 400 for the kit. thanks again
 

·
Registered
Joined
·
330 Posts
how much for the seats amd the harnesses shipped to augusta or can meet and pick up
 

·
Registered
Joined
·
121 Posts
Discussion Starter #7
will check on shipping info lone.
408 want $1000.00 for rear and if you want just rear and the car will take $2000.00 car needs pass fender, radiator support and bumper cover to be fixed. car has professionally installed 8 pt cage. will sell car with all suspension parts, rear end, slicks on hurricanes and weld 3.5's for 3200.00 call me if interested. will sell car with everything above, 15x10 and slicks, 16x8's and tires, fuel pump, regulator, fuel cell, seats/covers/harness, flaming rivers rack w/ tie rod ends and steering shaft etc... for $4500.00 . basically want some of parts money back. I have been quoted $150.00 in labor plus parts to fix car here in VA. call me if interested. will sell car in a variety of ways, just need to move stuff out. thanks
 

·
Registered
Joined
·
330 Posts
just email when find out if not i can take a ride what ever is best need the seats



[email protected]
 

·
Registered
Joined
·
121 Posts
Discussion Starter #11
ttt. will also trade roller or certain part combos for a stock/slightly modded 5 speed car. nice vert, gt etc. let me know
 

·
RobKong
Joined
·
1,118 Posts
Still got the drag springs and airbag?
 
1 - 12 of 12 Posts
Top