Ford Mustang Forums banner
1 - 20 of 1059 Posts

·
Registered
Joined
·
1,185 Posts
Discussion Starter · #1 · (Edited)
*************** THE OFFICIAL HP LIST***************​
Minimum 315 SAE RWHP Required

Post your numbers in this thread and I will edit this post to reflect your entry. Please include combo details, and dyno sheets if available.

Combination details can be found in the post number listed at the end of some entries.​


RG = Race Gas
PI = Ported Intake
PSR = Ported Short Runner Intake

*SAE numbers preferred. STD numbers = SAE when adjusted approx 2% - 4% lower. Multiply STD numbers by .98 -.96 to get SAE
*All engines 4.6 Liter unless noted


------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


John [email protected] Performance (615+ SAE) 5.4L Ported 05+ GT's (4valve)/Cams/Sullivan Intake/Carbureted/RG. N/A HP Champion. See post #317 for details.

[email protected] Engines (600+/430 SAE) 3.7" Bore, Proprietary Stroke, Ported 05+ GT's (4valve) by Al/Cams/Sullivan Intake/Carbureted/RG.

Boss 330 (593 SAE) 5.4L, Ported 05+ GT's (4valve) by Al/Cams/Carbureted/RG/Dry Sump.

-------------------------------------------------------------------------------​

Nazman (Stang32v) (537/403 SAE) 5.3L, Ported 03+ Heads/FR500 Intake/Big Cams/RG blend. See post #318 for details.

Randy Haywood (548/439 STD*) 5.4L, Ported '00R's/Cams/Sheetmetal Intake/Carb.

Mike [email protected] Performance (507 SAE) 5.0L, Ported FR500/Short Runner Intake/Cams/RG. 5.0L HP Champion

ALLMTR2V by BES Race Engines (501/364 SAE) 289ci 4.6, Ported C Head, FR500 Intake, Big Cams, RG. Pure Street Race Engine. 4.6L HP Champion. See post 486 for details.

-------------------------------------------------------------------------------​

st0ck Mach 1 (493/389 SAE) 5.3L, Bowl Ported C Heads/238 Duration Cams/Sullivan Intake. See post 816, P.24 for details.

Tweeked (477/420 SAE) * (Dyno Dynamics)/ 5.88L, MMR Big Bore 5.4 Short block/Ported 03+ C Head/Aussie Boss Intake/Comp 106400 Cams. See post 704, P.21 for details.

Joe Hutchins (475) 5.3L(SHM), Ported B head/Cams/Kinsler IR intake/RG. B Head HP Champion.

-------------------------------------------------------------------------------​

James Lasurdo (svtsnake.com) (470/380 SAE) VT 5.3L, Ported FR500 Heads/FR500 Intake/Cams.

CptMorg (459/399 SAE) 5.0L Stroker/Ported Heads/10" NA SVT Intake/Custom Cams/E85 Fuel. see post 998, page 29 for details.

Nazman (Stang32v) (459/376 SAE) 5.0L Big Bore, Owner Ported FR500's/FR500 Intake & Cams.

Modular Performance Built (456/334 SAE) .030 4.6, Ported 03+ C, FR500 Intake, MP Cams, RG. Pure Street Race Engine. See post 437 for details.

Racer_X (452HP SAE) 5.3L, Full Ported/ 03 C Head/FR500 Intake/Crower Stge 3 Cams/PUMP GAS. see post #558, page 16 for details.

Racer_X (451/410 SAE) 5.3L, Full Ported 03 C Head/Aviator Intake/Crower Stge 3 Cams/RACE GAS. see post #558, page 16 for details.

-------------------------------------------------------------------------------​

WMS (448 SAE) 5.3L, Ported C Head/FR500 Intake/Cams.

Racer_X (from modularfords.com) (440/410 SAE) 5.3L, Bowl Ported 03 C Head/Aviator Intake/Crower Stge 3 Cams/RACE GAS. see post #558, page 16 for details.

Shawn Johnson (440 SAE) 5.0L, Ported C Heads/Mod Perf Cams/Custom Intake/Carbureted/RG. Pure Street Race Engine

NevrEnuf (mach1registry) (437 SAE) 5.0L, Big Bore/Ported 03+ C head/Carburetor/278 Comp Cams. see post 346, p.10 of this thread for details.

Paul S/PHP (430) 5.0L, Ported FR500/FR500 Intake/Cams/RG.

-------------------------------------------------------------------------------​

Fill (424.8/347.3 SAE Mustang Dyno) Ported 03 Heads/Crower Stage II cams/Carbureted Sullivan Intake/RG. post 662, page 19 of this thread for details.
gmsux (424/344 SAE) 5.0L, Lightly Ported FR500 Heads/FR500 Intake/Comp Cams. see post #562, page 17 for details.
NevrEnuf (mach1registry) (424 SAE) 5.0L, Big Bore/Ported 03+ C head/Sullivan Intake/278 Comp Cams. see post 346, p.10 of this thread for details.
360NotchforUrLS1 (420/390) 5.0L, Ported 99/01 C head/Ported Intake/Crane Cams.
jcitroloc (JeromeMach1) (412/372 SAE) 5.3L BB/Stroker/Ported 03 Mach C head/MP cams/Naz 10" Ported Short Runner Intake. see post 984, p.29 for details.
jzcobra96 (coolguy10786 from svtperformance.com) (410/378 SAE) 5.3L, Ported C Head/Ported Short Runner Intake/Competition Cams. see post #325, page 10 for details.
Shalom96 (410/337 SAE) 5.0L Stroker, Ported C(03) Heads/Ported Short Runner Intake/Houston Perf Cams.
Nazman (410/333 SAE) Owner Ported FR500 Heads/FR500 Cams/FR500 Intake. Stock Shortblock HP Champion.
01CobraSVT TICO (410/323.5 SAE) 5.0L BB/Ported 01 Heads/Hensler Spec Cams.
Dennis Sharp/DS97Cobra (420/330 STD*) 5.0L Ported FR500 Heads/FR500 Intake, Houston Perf Cams.
g-ride14 (407/370 SAE) 5.3L, Ported 04 C Head/Factory 10" Runner Intake/[email protected] Cams. see post #683, page 20 for details.
jcitroloc (JeromeMach1) (405/360 SAE) 5.0L BB/Ported 03 Mach C head/MP cams/Naz 10" Ported Short Runner Intake. see post 355, p.11 for details.
birdman941 (404/387 SAE) 5.4L, Ported 03 C Head/Boss 330 Spec Custom Cams/Aussie Boss Intake. See post 433 page 13 for details.
Mystic1/Ted S. (414/335 STD*) 5.0L, Ported 01 Heads/FR500 Intake/Mod Perf Regrinds.
9COBRA8 (400/327 SAE) 5.1L, Ported B Heads/Ported Intake/Comp Cams.
trxcobra (400/322 SAE) 5.0L, 99 C Heads/NA SVT 5" Short Runner Intake/106400 Comp Cams. see post #705, page 21 for details.

-------------------------------------------------------------------------------​

nastynate_03 (from mach1 registry) (396/368 SAE) 5.0L stroker, Ported 03 C Heads/Ported Intake/Comp Cams see post 268 of this thread for details.
Clayton351 (394/310 SAE) Boss 330 built 4.6 with Ported 03 Heads/Boss 5" Short Runner Intake/00 Cobra R Cams. post 644 page 19 for details.
ryans03mach (391/353 SAE) Ported Intake/03+ C Head/Comp 106100 Cams. Factory Freak HP Champion see post 945 p. 27 of this thread for details.
Blacksnake305 (lafear01) (388/376 SAE) 5.0L BB, Fox Lake Ported 01 Heads/Joeys Ported Intake/FR500 Cams.
wldtang (386/356) * Mustang Dyno * Competition Valve Job/Custom Cams by NA SVT/E85 Fuel. see page 29, post 991 of this thread for details.
ITLRUN (Joe Charles) (386/312 SAE) * Mustang Dyno * Ported 03 Heads by Boss 330/FR500 Intake/FR500 Cams. post 552 page 16 for details.
Ron 99 Cobra (385) 5.0L, Ported C Head/Ported Short Runner.
RoysMach (Roy from Mach1Registry) (384/359 SAE) CNC Ported 03+ C Heads/Owner Ported Intake/Stage 2 Cams. post 331 of this thread for details.
qwicksvt (384/321 SAE) .020/FR500 Heads/FR500 cams/FR500 Intake. post 285 of this thread for details.
Jims SVT (382/318 SAE). JSR (jims svt) Ported Short Runner. Ported96-98 B head/Cams.
NVENEM8U (381/323 SAE) * Mustang Dyno * B Heads with valve job/Owner Ported Short Runner intake/Competition Cams. post 260 of this thread for details.
Bmeagher (378/302 SAE) FR500 Intake/03+ C Head/Comp 106100 Cams. Cams Only HP Champion see post 758 p. 22 of this thread for details.
BLKstang23 (375/412 SAE) *Mustang Dyno* 5.4L, Ported C Head/Crower Stage 3 Cams, RG. See post 669, p. 20 for details.
JL.Motor (375/324 SAE). JL.Motor built 4.6/Slightly Worked C Heads/FR500 Cams/JL.Motor Ported Short Runner/E85 Fuel. See post 776, p. 23 for details.

-------------------------------------------------------------------------------​

86stroker (Kezell from SVT Performance) (374/365 SAE) Stock Short Block/Naz Ported 99/01 C Heads/Naz Ported Short Runner Intake/Stage 3 type Comp Cams. post 313 of this thread for details.
Shawn Johnson (374 SAE) 99' .020 over cylinder bore, valve job, stock cams & intake set up for Factory Stock race class.
jcitroloc (JeromeMach1) (372/363 SAE) 5.0L BB/Ported 03 Mach C head/FR500 cams & valvetrain/Ported Intake.
C Weil (372/324 SAE) 5.0L, Ported B Heads/SSR intake/FR500 Cams.
Chris Scott (371/358 SAE) Stock 96 block with C Head Conversion/Comp Cams. see post #456, page 14 for details.
bigja01cobra (svtperformance) (371/340 SAE) 5.0L stroker, Ported 01 C Head/Stock intake/Comp Cams stage 3. See post #370 for details.
Joe Lynch (370/300 SAE) Ported C Heads/5" Ported Short Runner Intake/Houston Perf Regrind Cams.
James Hensler (370 SAE) Ported B Head/HCI intake/Cams/RG.
Torchredmach (from Mach 1 Registry) (367/362 SAE) 5.4L, Boss 330 Built Short block/Aussie Boss Intake/03+ C Head/Boss 330 Spec Custom Cams. See post 674, P.20 for details.
Jester (mach1 registry) (378/325 STD*) Boss Ported 03 C heads/FR500 cams/FR500 Intake. post 262 of this thread for details.
PeteEpple (from Mach1registry) (367/331 SAE) FRRP Aluminator, Stock 03+ C Head/Roy Ported Intake/Comp 106400 Cams. See page 17, post 587 for details.
Bmeagher (365/322 SAE) Naz Short Runner Intake/03+ C Head/Comp 106100 Cams. see post 673 p. 20 of this thread for details.
Paul W (364/340 SAE) Ported 04 C Head/Comp Cams. see post 248 of this thread for details.
ITLRUN (363.8/311.3 SAE) Bowl&Valve Work by Boss 330 on 03 heads/FR500 Intake/Stock Mach Cams.
NevrEnuf (mach1registry) (363 SAE) Aviator Short Block/Ported Intake/Stage 3 Crower Cams. see post 331 of this thread for details.
gfong (mach1registry) (362/334 SAE) 03 Mach 1/Roy Ported Intake/106400 Comp Cams. see post 326 of this thread for details.
ramnstang (362/305 SAE) Ported 99 C Head/Cobra R Cams/FR500 Intake. see post 657, p. 19 of this thread for details.
stangonline (360/334 SAE) 5.0L Stroker/FR500 Intake/Stock 03 Mach C head/SHM Stage 1 Cams.
C Weil (car previously owned by David Simmons) (360/326 SAE) 5.0L, Ported B Heads/SSR intake/FR500 Cams.
vrtical (360/320 SAE) Ported 01 C Head/Aviator Intake/Crower Cams/RG.
CptMorg (358/332 SAE) Mach 1/Cams/NA SVT 10.5" Short Runner Intake/E85. see post 710, page 21 for details.
Bob Cosby ([email protected]/[email protected] SAE) 99' .020 over cylinder bore, valve job, stock cams & intake set up for Factory Stock race class.
ddmander (356/355 SAE) 5.0L/Ported C Heads/Extrude Hone Intake.
Silver01Cobra (356/348 SAE) Ported FR500 Heads/Ported Intake/FR500 Cams.
SparksMach1 (from Mach1Registry) (355/354 SAE) 03+ C Heads/Ported Naz Intake/FR500 Cams. see post 338 of this thread for details.
SHAKN' 04 (mach1registry) (355.8/330.4 SAE) 03+ C Heads (Mach1)/Roy Ported Intake/Comp 106100 Cams. See page 21, post 711 for details.
bitemark46 (355/304 SAE) B Heads/Cams/Owner Ported Short Runner.
dsg04mach (354/331 SAE) Ported Heads/Ported Intake/224-226 Cams. see post 612, page 18 for details.
Barry Shepard (350) Ported FR500 Heads/FR500 Intake/Cams/RG.
99BlackVenom (350/329 SAE) Ported FR500's/Extrude Hone Intake/SHM Stage2 Cams.
Shaken1 (mach1registry) (350/322 SAE) Ported 03+ C Heads/SHM Cams. see post 290 of this thread for details.
Cobra4123 (350/321) "B" Head/Short Runner Intake/Stage 3 Crower Cams.

-------------------------------------------------------------------------------​

Mach Boy (349/335 SAE) 03 Mach 1/Ported Intake/Mild port on heads/FR500 Cams. see post 526 on pg 16 of this thread for details.
Mach916 (from Mach1Registry) (348/331 SAE) 03+ C Heads/Crower Stage II Cams. see post 672, P.20 of this thread for details.
Grimreaper (347 SAE) Ported Intake/Stage 3 Comp Cams.
Modularspeed (346.78/331.04 SAE) 03 Mach Engine, Modular Speed Ported Intake, 96 Cobra Cams. Bolt on HP Champion. see post #619 for details.
Olgreydog7 (346/296 SAE) Ported FR500 Heads/FR500 Intake/FR500 Cams. (see post #307 of this thread for details.
Duane V (346/293 SAE) Ported B Head/PI/Crower Regrind Cams/RG.
RedCobraVert (346/318 SAE) Ported C Head/Cams.
L.T. Smash (from Mach1Registry) (345/321 SAE) 04+ C Heads/Competition Cams 106100's.
Ben 99 GT [/B] (343.75/343.50 SAE) Ported Intake, 2005 C head/01 Cobra Cams. see post #246 for details.
PC PRO (338/334 SAE) 03+ C Head/Naz Ported Intake, 98 Cobra Cams. see post #314 of this thread for details.
elyrain (337/345 SAE) Ported 01 C head. FR500 valvetrain/cams.
Nazman (337/337 SAE) PI, 99 C head.
huzsvt (337/336 SAE) SHM stage 2 ported intake and stage 1 ported 99 C heads/Crower Cams.
boostownsme (336/323 SAE) 03+ C Head/Comp Cams. see post #918 p. 27 of this thread for details.
4VMENACE (335/319 SAE) Short Runner Intake/Ported 97 B head/SHM Cams.
Shaun351 (333/330 SAE) Ported Intake/03+ C Head/98 Cobra Cams. see post 613 p. 18 of this thread for details.
Bmeagher (332/312 SAE) Short Runner Intake/03+ C Head/98 Cobra Cams. see post 557 p. 16 of this thread for details.
ExplorerThis (from SVTPerformnce) (331.65/323 SAE) 01 C head.
modularspeed (331.7/320 SAE) 01 C head/Ported Intake see post #289 of this thread for details
tmhutch (331.6/325 SAE) 01 C head, Ported short runner intake.
the1silverbullet (330/327 SAE) Ported intake/Ported 04 C head/FR500 cams/auto trans w/stall convertor. See post 333 for details.
CYA (from SVTPerformnce) (330/320 SAE) Ported, extrude honed intake. 01 C head.
Jeff Peterson (330 SAE) PI. 01 C head.
quikbluewagon (329.4/321.5 SAE) 04 Mach 1 with 96 cobra cams. see post #642, pg 19 for details.
Stedda (328/321 SAE). 01 C head.
Quick01snake (327/327 SAE). 01 C head.
modularspeed (326.4/322.7 SAE) 03 Mach engine/Ported Intake see post #536, pg 16 of this thread for details.
Jims SVT (326/305 SAE). JSR (jims svt) Ported Short Runner. 96-98 B head.

-------------------------------------------------------------------------------​

stockmach1 (mch 1 regstry.com) (324/337 SAE) 03 C head.
Mudd92 (mch 1 regstry.com) (323/325 SAE) 03 Mach 1 w/98 Cobra cams. see post 323 for details.
cobraman1024 (323/304 SAE) Ported B Heads/Stage III Cams. see post #1018, page 30 for details.
4V GTS (322.4/317.9 SAE). C head.
kxt (svtperformance.com) (322/317 SAE) 01 C head/Ported Intake. see post #267 of this thread for details.
32VHEMIJR (322 SAE) PSR. C head.
bcastro (321/359 SAE) 5.3L, MMR stage III Ported C Head/MMR Ported Intake/Comp Cams. see post #691, page 20 for details.
BEERFORMEPLZ (321/353! SAE) 04 Mach.
mach1soldier (321 SAE) Auto Mach 03 C Head/Roy Short Runner/Cobra R Cams. see post #1024, page 30 for details.
MODSTER (320). C head.
Skyler (320/319 SAE) PI by Naz. C head.
TxSnakeCharmer (320/310 SAE) Extrude Hone Intake. C head.
RUNNINFAST (320/299) B head/ported intake/dome pistons/SHM cams.
bitemark46 (320/298 SAE) owner ported short runner. B head.
Joe98Stang (319/309) C head.
COBRACIDE (319/316) C head.
99SVTAddict (318/315 SAE) PI. C head.
Jamie R. (from SVTPerformance.com) (318/307 SAE) PI. C head. see post 286 of this thread for details
SVT CAMR (318/290 SAE) Ported short runner Intake. 96-98 B head.
Red01 (316/321 SAE) 01 C head.
masterofthepuppets (316/316 SAE) 01 C head.
arhyne07 from Modular Fords (325/370 STD*) 5.4L, Stock 5.4 Long Block/Birdman's Aussie Boss Intake kit. See post 570, page 17 for details.






XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX





*****THE OFFICIAL TQ LIST*****

Boss 330 (520/440 STD*) 5.4L, Ported Navi/Cams/PSR/RG.
Randy Haywood[/B][/COLOR] (548/439 STD*) 5.4L, Ported '00R's/Cams/Sheetmetal Intake/Carb/RG.
[email protected] Engines (600+/430 SAE) 3.7" Bore, Proprietary Stroke, Ported 05+ GT's (4valve) by Al/Cams/Carbureted/RG.
Racer_X (from modularfords.com) (439.7/409.6 SAE) 5.3L, Bowl Ported 03 C Head/Aviator Intake/Crower Stge 3 Cams/RG. see post #558, page 16 for details.
birdman941 (404/387 SAE) 5.4L, Ported 03 C Head/Boss 330 Spec Custom Cams/Aussie Boss Intake. See post 433 for details.
jzcobra96 (coolguy10786 from svtperformance.com) (410/378 SAE) 5.3L, Ported C Head/Ported Short Runner Intake/Competition Cams. see post #325, page 10 for details.
Blacksnake305 (lafear01) (388/376 SAE) 5.0L, Ported Heads/Joeys PI/FR500 Cam.
arhyne07 from Modular Fords (325/370 STD*) 5.4L, Stock 5.4 Long Block/Birdman's Aussie Boss Intake kit. See post 570, page 17 for details.

From Here Down List Is Not Updated

ddmander (356/355) 5.0L/Ported C Heads/Extrude Hone Intake.
jcitroloc (353/355 SAE) 5.0L BB/Ported Intake/03 Mach C head with prep work by Boss 330.
BEERFORMEPLZ (321/353! SAE) 04 Mach with bolt ons.
Silver01Cobra (356/348 SAE) Ported FR500 Heads/Ported Intake/FR500 Cams.
Nazman (from Mighty Mustangs) (376/341 SAE) Owner Ported Intake/Owner Ported FR500 Heads/FR500 Cams.
Bob Cosby ([email protected]/[email protected] SAE) Untouched heads/cams/intake.
Nazman (from Mighty Mustangs) (337/337 SAE) PI.
Mystic1/Ted S. (414/335 STD*) 5.0L, Ported C Heads/FR500 Intake/Mod Perf Regrinds.
99BlackVenom (350/329 SAE) Ported FR500 Head/Extrude
Dennis Sharp/DS97Cobra (420/330 STD*) 5.0L Ported FR500/FR500, Houston Perf Cams.
Quick01snake (327/327 SAE). 01 C head.
Blown46Cobra/David Simmons (360/326 SAE) 5.0L, Ported B Head/SSR intake/FR500 Cams.
tmhutch (331/325 SAE) PSR.
Stedda (328/321 SAE).
RedCobraVert (346/318) Ported C Head/Cams.
4V GTS (322.4/317.9 SAE).
COBRACIDE from Corral (318/317).
99SVTAddict (318/315 SAE) PI.
103 (Dustin) (320/315 STD*).
TxSnakeCharmer (316/308 SAE) Extrude Hone Intake.
Hone Intake/SHM Stage II Cams.
Joe Lynch (370/300 SAE) Ported C Heads/PSR Intake/Houston Perf Regrind Cams.
 

·
Registered
Joined
·
571 Posts
damn i was 313/316 SAE before the AL flywheel/spec clutch...i bet i'm over the 315 now, but i don't have any numbers lately....i'm guessing around 325 SAE....so do i miss the cut?

scratch that, i see some STD numbers up there
so my STD numbers are 324/327
 

·
Registered
Joined
·
189 Posts
TM - You can update my numbers with the new motor just built and dyno'd. I'm now at 350rwhp and 329rwtq. The dyno sheet is posted under the thread "New Dyno Racing personal best - 350rwhp - NA" posted on 5/18/04.
 

·
Registered
Joined
·
1,150 Posts
Hopefully I can move up on that list once I finish porting my heads and I decide on some smog legal cams. Wont be that much higher on the list, but Im not about to swap cams every time I have to smog.
 

·
Registered
Joined
·
1,685 Posts
32VHEMIJR said:
Hopefully I can move up on that list once I finish porting my heads and I decide on some smog legal cams. Wont be that much higher on the list, but Im not about to swap cams every time I have to smog.
welcome back to the NA club! (not that you wanted to be there lol). so i take it you sold the blower?
 

·
Registered
Joined
·
1,185 Posts
Discussion Starter · #7 ·
blacksnake305 said:
nice list. I'll have to re-dyno soon. I'm thinking i'm in the 380+ rwhp range after my exhaust change...:evil:
Cool! Get some numbers!

Todd
 

·
Registered
Joined
·
1,185 Posts
Discussion Starter · #8 ·
by quick01snake: i see some STD numbers up there
so my STD numbers are 324/327

Your TQ numbers are great. I'll bet your current combo is well into the 320's. I'll put you in at 317HP for now, based on your STD numbers adjusted 2% for SAE. Get us some new numbers and a dyno sheet
:joy:





by blacksnake305: nice list. I'll have to re-dyno soon. I'm thinking i'm in the 380+ rwhp range after my exhaust change...
Good, Ron 99 Cobra needs some competition:evil:





by 99BlackVenom: TM - You can update my numbers with the new motor just built and dyno'd. I'm now at 350rwhp and 329rwtq. The dyno sheet is posted under the thread "New Dyno Racing personal best - 350rwhp - NA" posted on 5/18/04.


Wow, nice improvement. I'll move you up the list! and your no longer getting beat up on by Nazman's bolt on car:D



by 32VHEMIJR: Hopefully I can move up on that list once I finish porting my heads and I decide on some smog legal cams.
Good to have you back and experimenting for the N/A guys:cool:



Todd
 

·
Registered
Joined
·
571 Posts
tmhutch said:
Your TQ numbers are great. I'll bet your current combo is well into the 320's. I'll put you in at 317HP for now, based on your STD numbers adjusted 2% for SAE. Get us some new numbers and a dyno sheet
:joy:
thanks....looks like i need a PI and headers to catch Naz.....:(
 

·
Registered
Joined
·
1,185 Posts
Discussion Starter · #10 ·
quick01snake said:
thanks....looks like i need a PI and headers to catch Naz.....:(
Yep, he's the rabbit for the bolt on guys. I was hoping to catch him today but things went sideways at the dyno. Maybe tomorrow:evil:

Todd
 

·
Registered
Joined
·
1,150 Posts
Yeah, I sold the blower. Had to pay off some taxes and Im getting a house soon. I was surprised when I found that my car wasnt as slow as I expected it to be after going back to N/A. I dont even have pulleys, headers, or my short runner.
 

·
Registered
Joined
·
1,185 Posts
Discussion Starter · #14 ·
Cobracide, thanks for posting the sheet!
 

·
Registered
Joined
·
1,150 Posts
Fourcam324 said:
Cool brotha, are you going to start making intakes again?
Im going to finish up a short runner for a buddy of mine, and we'll test it out. Its going to be a 8.5 inch intake. If I get a house with a freakin garage soon, and someday get the money to buy my own mill and welding equipment, that would make it a breeze. Right now, I have to use my shop here at work (not my company), after hours, and I have to pay a hot rod welder guy around the corner to do that work. As for now, making intakes is next to impossible. There is a conflict of interest here at work and I need to find a way to do it completely on my own.
 

·
Registered
Joined
·
74 Posts
301 RWHP 304 RWTQ Mods in sig.
 

·
Registered
Joined
·
1,185 Posts
Discussion Starter · #17 ·
Rice Hunter said:
301 RWHP 304 RWTQ Mods in sig.
Hey Rice Hunter, 315rwhp sae is the minimum ante to get on the list. Need a couple more mods:)

Todd
 

·
Registered
Joined
·
439 Posts
How many of these would pass smog?
 

·
Registered
Joined
·
1,185 Posts
Discussion Starter · #19 ·
stricky said:
How many of these would pass smog?
Haha, probably have better luck on the "N/A Miles Per Gallon List"

Todd
 

·
Registered
Joined
·
1,150 Posts
I passed with less emissions than a 4 banger honda.
 
1 - 20 of 1059 Posts
Top