Ford Mustang Forums banner

1 - 15 of 15 Posts

·
Registered
Joined
·
6,370 Posts
Discussion Starter #1
Stolen from the Northeast for sale thread. I used the heck out of the Northeast one when I lived there and since Superior Stangs is gone this is something besides Craigslist.

- Same rules apply as the classifieds

- Your location is REQUIRED (both city and state) as it is in the classifieds or your post will be deleted. Go to User CP and Edit Profile, there is a location box, fill out your city and state.

- As of right now this is for ONLY mustang car parts. No other makes or models and no vehicles.

- Try to include a phone number or email address in your ad.

- If your intrested in a parts, PM/Email/Call the person. Please do not post on here or this thread will be 20 pages long.

- If your item sells edit your post and say so. Do not make extra posts.
 

·
Registered
Joined
·
696 Posts
TREVOR SMITH
BEAVERTON OR

FlowMaster cat back with chrome tips. Installed on the car. Drove it once and parked it. still on the car comes with off road X PIPE. $350

Black Hatch back interior 1/4 Panels $100


out of an 89 mustang GT Grey dash in great shape $125


Grey dash painted black $100


MSD plug wires $40 maybe 2500 miles on them

BNIB Ford racing timing chain set m-6268-b302 $85
http://www.summitracing.com/parts/fms-m-6268-b302/overview/make/ford

Grey Glove box $35


Grey glove box painted black needs touch up $35


Can get pics for everything
 

·
Registered
Joined
·
55 Posts
Eastside, WA
$400 Obo, might be interested in trades for other wheels
Cobra R replica Wheels, 4 Lug Foxbody Wheels
Plasti-diped due to the chrome underneath flaking off, I'll include a can of plasti-dip with the wheels, or I'll touch them up before you get them.
17x8 I believe, Tires are currently Federals 245/45/R17 and have decent tread (If i remember when i go to the store ill get a tool to measure the depth) but aren't exactly great tires for grip. The front left has a very very small amount of curb rash. Still on car, I'll take them off when someone gets them.
PM me for more photos or info

(it comes with all 4 just didn't want to use a bunch of space)
 

·
Registered
Joined
·
660 Posts
SOLD!!!!!!!!Time has come to sell her,... I gave it to my son, but he got a 65 now, so we must sale, too many cars.... Money goes to son for his car. Had this car since 1998, lots of work, was a daily driver. Uses no oil, no smoke, runs great, transmission shifts great. Asking $5000. Located in WA state. Mods as follows:
Engine: mild tune 310 RHP 370 TQ on stock clutch (never put clutch in it)
2.2 KB supercharger
165 AFR Heads
42 lb injectors
Adj fuel pressure regulator
255 LPH BBK fuel pump
CAI
BBK 70mm throttle body
90mm Lmaf
BBK short headers
Magnaflow catted X-pype
Flowmaster delta 40s with tips
Dual elec fans
Three row alum radiator
Innovate wide band O2
Tweecer tuned (not selling, will put SCT chip back in)
Interior:
Autometer boost guage(on pillar)
Autometer fuel press guage(on pillar)
AFR guage(innovate)(vent)
White face guage
Short throw shiffter
New black carpet
Exterior:
Complete 93Cobra stalker kit(cervini)
Cobra R wheels (245×45×17)
UPR front coil over kit
Max motorsport cc plates
Maximum Tubular K member
Tubular rear control arms
Rear lowering springs
88 T-bird rear disc with cobra parking break cables
3.27 gear
New windshield cowl
Replaced gas tank
More pics here : Stang For Sale Photos by psychoII | Photobucket

 

·
Registered
Joined
·
512 Posts
2 sets of Canfield cylinder heads.
Selling separately.

Both new style with cnc combustion chambers.
Both are new, never run however 1 (solid roller) has been decked to 60cc combustion chamber and set on block for mock-up.

1 set is setup for hydraulic roller (20-475-58-1) $1350.00
1 set is setup for solid roller (20-475-65-1) $1600.00

PM me with reasonable offer.

I'm located in Seattle area and will deliver with consideration to distance.
 

·
Registered
Joined
·
512 Posts
Dana
Seattle WA

New
Have been used for mock up and fitment, no blemishes, no dents.
Decked to 60cc Combustion Chambers.
Have been CC'd.
Ferrea Valves.
Comp Cams Springs.
Viton Seals.
Solid Roller setup

Spring Type: Mechanical Roller
Seat Pressure: 230 Lbs
Pressure @ .600" Lift: 560Lbs
Max Lift: .780" Coil Bind

Asking 1350.00
Willing to install your springs you provide
Shipping available Worldwide.

Will post pictures if I can figure out the process which hasn't been working for me lately.


 

·
Premium Member
Joined
·
27 Posts
Any chance you still have this heads for sale?

Dana
Seattle WA

New
Have been used for mock up and fitment, no blemishes, no dents.
Decked to 60cc Combustion Chambers.
Have been CC'd.
Ferrea Valves.
Comp Cams Springs.
Viton Seals.
Solid Roller setup

Spring Type: Mechanical Roller
Seat Pressure: 230 Lbs
Pressure @ .600" Lift: 560Lbs
Max Lift: .780" Coil Bind

Asking 1350.00
Willing to install your springs you provide
Shipping available Worldwide.

Will post pictures if I can figure out the process which hasn't been working for me lately.


 
1 - 15 of 15 Posts
Top