Ford Mustang Forums banner
1 - 3 of 3 Posts

·
Administrator
Joined
·
994 Posts
Discussion Starter · #1 ·
Wheel Car Vehicle Tire Hood


Hi Corral members!

We’ve received numerous requests for a sub-forum based around the upcoming S650 Mustang.

A sibling forum already exists for the 7th Gen and we’ve decided that rather than split the discussion on it, those who are interested can join here:

7thMustang.com

If you’re interested in the next-gen Mustang, sign up and say hi!

We’ve also created a link node at the bottom of the site for future reference.

Happy Posting!

The Admin
 

·
Registered
1948 ALL CANADIAN F47 PANEL TRUCK
Joined
·
1 Posts
I have a question to the general membership--I am about to install a set of gt40p heads into my 1948 ford panel truck that has a 70,s 302 in it. NO Smog setup in canada due to the age. All I am looking for is a little more pep because the truck weigh's in at 4700 lbs. The engine is a stock 4 bbl, I will be adding a new exhaust system with the proper Mac headers just wondering if I should rest the timing back a bit and if so what type of hp increase might I gain..Thanks Butch in Ontario Canada.
 

·
Registered
Joined
·
4,979 Posts
I have a question to the general membership--I am about to install a set of gt40p heads into my 1948 ford panel truck that has a 70,s 302 in it. NO Smog setup in canada due to the age. All I am looking for is a little more pep because the truck weigh's in at 4700 lbs. The engine is a stock 4 bbl, I will be adding a new exhaust system with the proper Mac headers just wondering if I should rest the timing back a bit and if so what type of hp increase might I gain..Thanks Butch in Ontario Canada.
You'd have better luck posting your question here:
5.0/5.8 Engine Tech
 
1 - 3 of 3 Posts
Top