Ford Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
Trickflow Track Heat aluminum heads.... TFS-51400011 The o-ringed ones!
I also have the Trick Folw Stage 1 cam.

What else do I need?

What roller Rockers? 1.6? What kind should I get?

Intake? What type is best.


It's going on a stock 302 about 1,000 miles.
 

·
Registered
Joined
·
79 Posts
I think you need special pushrods for TFS heads, not sure though. The Holley intake is probably the best but the performer RPM 2 and the Track Heat are both great too.
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #3 ·
Okay...anyone know about these pushrods that I may need?

Thanks!
 

·
Registered
Joined
·
1,189 Posts
the pushrods for the trickflows are very easy to come by...either you have hydrualic flat tappet or hydrualic roller lifters....just call summit and ask them for the Trickflow pushrods for which ever lifters you have...they have the measurements.

(i just called and said i have a flattappet cam, i want the trickflow pushrods for my twisted wedge heads.)

i just went ahead and ordered the Trickflow rockers 1.6 while i was getting the heads and pushrods. they are good quality from my experience and look nice.
 
1 - 5 of 5 Posts
Top