[svoman2300]

This is not entirely correct...
I have a 5 lug conversion with 94 spindles and I know everyone on the internet says the 94-95 spindles preserve the stock track, but I have a hunch they push out the wheels just a tiny bit... I have a number of friends with 94-95 spindles who agree... I would estimate that it is a few mm.

The 96-98 spindles will push out the wheels 8mm further than the 94-95 spindles.

The 99-up spindles will push them out even further than the 96-98...

From my experience I would not even think about running anything other than the 94-95 spindles. My 17x8 Bullitts already rub just a bit under extreme load and that would just be made worse with 96-up spindles... I plan to address that with stiffer coil springs and slightly more negative camber.

I have 01 spindles with Fox control arms and Eibach springs on my SVO with 17x9 Konigs and 255/40's no rubbing what so ever.

 

[svoman2300]

Not sure about offset but 6" backspace. http://www.maximummotorsports.com/konig.asp Maybe it fits good because of the SVO k member?