Ford Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,963 Posts
Discussion Starter #1 (Edited)
Bought this harness from a buddy that was cleaning his garage out and I really do not need it as my '93 stays in the garage and the harness on it is in great shape. I thought I might want a spare but have decided to sell it as I will most likley never use it and I am sure someone else needs it. He installed the harness on his car for about a year and then pulled it off when he swapped combos and went stand alone. Basically he just rolled it up and put it back in the box it came in and I think there is more dust on it than anything. Looking to get $400 + shipping (buyer determines shipping speed and carrier). Not really interested in shipping out of the lower 48 states as I have only done that once but if need be we can discuss.

Couple of things on this harness, it was made off of the 92-93 harness design so those are the cars it will go directly into and I believe discontinued this harness in 2007. I have seen where some guys with 90-91 cars have made it work but it had to do with using the connectors off their old harness to get it to mate up with the connections in the car and knowing what wire goes where i.e. tracing wiring diagrams. I am not sure if it will work with 87-89 cars as they are non-air bag cars so do some research there.

I am not posting my email address for obvious reasons (bots) and same for my phone number. PM me and I will respond as I keep my inbox empty and get notifications.

 

·
Registered
Joined
·
1,056 Posts
Slowcobra was looking for one of these, I shared it to his original post he made.
 
  • Like
Reactions: d brune

·
Registered
Joined
·
1,963 Posts
Discussion Starter #3
Appreciate it!
 

·
Premium Member
Joined
·
4,852 Posts
I bought 2 of these back in the day, one is on my 92 race car and the other is still in the ratty old box. One other thing, these harnesses don't have air bag sensor wiring in them. Very cool, hard to find part. Fair price too! Free bump and good luck with the sale.
 

·
Registered
Joined
·
1,963 Posts
Discussion Starter #5 (Edited)
From what I understand the wires are there just tucked into the harness but no connectors so you simply reuse the ones off your old harness. I have not verified this but have seen it posted in a couple of threads on forums. Got my curiosity so I looked over the wiring diagram for my '93 and there are in fact two round white connectors that come out of the harness at the same spot the MAF and relay connections. they connect to the front center and front right crash sensors. Not sure how they tie back to the air bag module but my guess is another connector near the firewall. Going to look into this some more and see if they just simply laid four wires into the harness as a path from point A to point B for the air bag sensors. If that is the case it would be easy to add them if they are not already in the harness like a couple of other threads mentioned.
 
1 - 5 of 5 Posts
Top