Ford Mustang Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
2,191 Posts
Discussion Starter #1
There's a lot of nice parts on this engine. That Jones setup is really nice. There's a lot left in this setup.

 

·
Registered
Joined
·
3,554 Posts
Can that 76mm make 1000 rwhp? looks like they used the 18+ spring in the gate to make 800 crank. Their 350-375 na power I estimate seems very low.

fun videos to watch.
 

·
Registered
Joined
·
2,191 Posts
Discussion Starter #4
That's plenty for the street, especially in that bare bones car. I wish I could afford that front dress setup. Having a vacuum to vent the valve covers is badass.

I'll bet their PS pump is NOT noisy as F%^&...
 

·
Registered
Joined
·
3,512 Posts
My 9:1 353 with similar heads, cam and intake made 480hp at 6700rpm running a 650 carb and beat up 1 5/8 dyno headers with 26* of timing. With bigger carb, headers and a bit more timing it would have hit 500hp. That hp sounds like imo.
That turbo will support 1100+ hp. With less cam on my engine and old 76 GTS it made 900hp at 15psi.
 

·
Registered
Joined
·
3,512 Posts
I wonder if that girdle is robbing hp? That is the main difference in my engine. ;l
 
1 - 9 of 9 Posts
Top