[JKCOBRA98]

Order #5 or #8 - people quit numbering. I guess in the +26mm offset, and 5.72" backpacing. What ever will work on 94-95 spindle and fox length axles.

I too would like this setup!

Matt

 

[JKCOBRA98]

I want whatever works on a stock rear track, and 94-95 spindles...

This is what I need FOX rear width and SN95 fronts on Fox A-Arms.

Thanks,
Matt

 

[JKCOBRA98]

Whatever back spacing this works out to be (FOX stock rear width and SN95 spindles on Fox A-Arms) is what I want...

Matt

 

[JKCOBRA98]

Just thinking of listing some pros/cons for each offset we're considering. Any others I’m missing?

+26 mm offset pros
Provide more fender clearance for those who use 96+ spindles and/or most aftermarket K-members.
Provide more fender clearance to run a wider (275/40) tire up front.
Help with fender clearance issues especially if you lowered your car over 1.5”.
Will this not help provide more REAR fender clearance for those with SN-95 axles and wide tires?

+29.5 mm offset pros
Help those who plan on widening these wheels.
Help fill the wheel wells for those with near stock Fox length axles (sit closer to the outside).

I don’t think these offsets are a big issue for the rear of our cars, weather you have stock length or SN-95 axles. I think the issue comes down to front fender clearance and widening the rear wheel. Yes, I’d prefer the +26, but we can flip a coin for all I care =). I’ll let those with front clearance/widening issues decide what we do and I don’t think the 3.5 mm between the two will really be a show-stopper for either camp. MHO-FWIW

If this information is true then I would want the 29.5mm

Matt

 

[JKCOBRA98]

Officially change mine to the 29.5mm offset please. I will be getting the 96+ spindles for my car as the 94-95 ones are becoming to pricey for me.

Matt

 

[JKCOBRA98]

satin for me as well.

 

[JKCOBRA98]

Since 7 Dec is the date to have the orders in we really need to get this going!!! Lets get the order forms out so people can get the deposits in. PEACE!!!

YES PLEASE!

 

[JKCOBRA98]

The order is being put in with another big order. He already talked to the manufacturer and they said ok to the package. He will post the order sheet on here asap.
Alex

I thought there was going to be a deposit that was needed before the order would be made. I was just wondering if that was ever sent out so that we could make the deposit that was needed at the time. I want to ensure that I will get a set that is being ordered for me.

Matt

 

[JKCOBRA98]

I just wish the forms would be here so we can get this moving forward as it seems to have stalled.

YES PLEASE!

 

[JKCOBRA98]

I haven't had an email or call yet either but I will wait longer as this has been a long journey to get here already! I don't have a mustang to install these on but they will look good on my 5.0 Ranger! Maybe I will have an early SVT look for the ranger.