Ford Mustang Forums banner
1 - 20 of 427 Posts

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #1 · (Edited)
We here at corral are a very community based mustang website. We have connections here that blow my mind. At any rate. It has come to my attention that we have the means to run a limited, maybe new line, of 1993 cobra rims that are 5-LUG!!!!!!

The requirements are the following:
1. We have to secure an order of 20 sets of rims, to make this first run. (I am not naming names as to who where etc., but it can and will be done. I have taken it upon myself, to poll the sales and to try to complete this group order.)
2. Please reply to this ad and in your post, number your self accordingly so that our member can see how many sets we have to go to get the ball rolling.
3. On a poll of 20 or more sets we will majority rule the dimensions to the winners.



Our limited run will resemble 93fiveoh's prototype rims.
THANKS FOR THE PICS 93FIVEOH!!
 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #21 ·
jim jr is #8.
blk50cobra is #10
sinhumane I do not think they will work unless you upgrade to gt/cobra stuff. The T-bird stuff has a different lug pattern.

And to answer the question. These rims will be roughly 5.75" bs, much like the 99 cobra rims, except you will have another .5" on the other side of the rim. A 255 series tire will work good.

We need 20 sets preorder to get the first run made, then we will go from there. But again, for gt/cobra brakes, 5-lug 1993 cobra rims, 17x8.5" wheel with a +26mm offset, and 5.72" backpacing.

We are half the way there everyone. We will work out the details when we get to 20. I posted links on racingjunk.com, stangnet.com, mustangworks.com, I did not do corral yet, doing it now.
Alex
 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #30 ·
QUOTE:
mustangcam302 said:
Interested in how the wheel situation is going? What is the price per wheel going to be?? And this is the correct offset for a fox with SN95 brakes up front and rear with fox track in the rear? Interested. Any info would be great. Thanks.

Cameron
Price has yet to be determined. We will know when we get at least 20 sets preordered. Yes, they will work with your set up, that is the same set-up I have with a DTS 9" rear. They are much like the 99 cobra's except there will be another 1/2" of rim to the outside of the rim. Perfect for 94/95 spindles and stock fox track.
Alex
 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #34 · (Edited)
Price would be about $35 higher than on the site as it would cover tooling modifications to the centercore of the mold.
As for the offset and clearance. To my understanding the SN95 brakes up front are going to push your track out another .75".

They will fit much like the 17x9 6"bs R's would. But you would have .25" less rim to the outside of the wheel.
 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #36 ·
From stock, the 94/95 spindles push the front wheel out 1/2" 96+ spindles push the wheel out 3/4" UPR/most k-member combo's, push the rim out another 1/2" or so to get the camber increased.
 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #44 · (Edited)
Yes Sir. Ok, here is his list to date, correct me if I am wrong.

Pre-Order List(wishfull)
#1 Alexandros
#2 yellow&blcak95gt
#3 Psychostang
#4 Fastfox400
#5 fromme
#6 scsvt
#7 STREETFIGHTER50
#8 JimJr
#9 jkcobra98
#10 blk50cobra
#11 robh
#12 mlanoux
#13 runin1320
#14 umachnme
#15 fastfox400#2(customer's car)
#16 93cobra#2771
#17 TBD
#18 TBD
#19 TBD
#20 TBD
 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #48 ·
Three more to go. Serious preorder list. Looking at $500 per set. There might be left overs available to corral, but in order to get to left overs we will need 20 orders secured prior to machining. If anyone on this list is not 100% serious that they can pay for their set, please let me know and I will take you off the list. I will not put in the order until we get to 20 sets on our list. This might be a one time thing, and I am trying to make it happen.
Alex
 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #49 · (Edited)
Pre-Order List (SERIOUS)
#1 Alexandros
#2 yellow&blcak95gt
#3 Psychostang
#4 Fastfox400
#5 fromme
#6 scsvt
#7 STREETFIGHTER50
#8 JimJr
#9 jkcobra98
#10 blk50cobra
#11 robh
#12 mlanoux
#13 runin1320
#14 umachnme
#15 Fastfox400#2
#16 Fastfox400#3
#17 Fastfox400#4(customer car)
#18 TBD (This could be you!)
#19 TBD (This could be you!)
#20 TBD (This could be you!)

 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #61 · (Edited)
As soon as I have 20 orders I will work out the details with the machinist.
Alex


Pre-Order List
#1 Alexandros
#2 yellow&blcak95gt
#3 Psychostang
#4 Fastfox400
#5 fromme
#6 scsvt
#7 STREETFIGHTER50
#8 JimJr
#9 jkcobra98
#10 blk50cobra
#11 robh
#12 mlanoux
#13 runin1320
#14 umachnme
#15 fastfox400#2(customer's car)
#16 93cobra#2771
#17 93kingcobra
#18 TBD
#19 TBD
#20 TBD
 

·
Registered
Joined
·
2,672 Posts
Discussion Starter · #72 · (Edited)
As soon as I have 20 orders I will work out the details with the machinist.
Alex


Pre-Order List
#1 Alexandros
#2 yellow&blcak95gt
#3 Psychostang
#4 Fastfox400
#5 fromme
#6 scsvt
#7 STREETFIGHTER50
#8 JimJr
#9 jkcobra98
#10 blk50cobra
#11 robh
#12 mlanoux
#13 runin1320
#14 umachnme
#15 88gtconvert
#16 93cobra#2771
#17 93kingcobra
#18 aaronlstiles
#19 awilson
#20 oldtimer
#21 yellowcar2
#23 jw33
#24 93svtcobra
Aaron, they don't know cause one of their employees is doing this on his own accord, let him get the credit for it.
Alex
 
1 - 20 of 427 Posts
Top