Ford Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
154 Posts
Discussion Starter #1 (Edited)
I see in the latest MM&FF mag that the 03 Cobra runs a [email protected] with a 60ft time of 2.0. Now, this car is also $36,000+ so I was wondering if anyone has any dyno and or track numbers with a supercharger and the normal boltons but with stock heads? I cannot afford a 03 Cobra ($500-$600 car note) nor can I afford to do heads and a supercharger, so I was wondering if I had a shot of getting close to those times? If money allowed I of course would stroke the motor, add heads and a supercharger. :D Thanks!
 

·
Registered
Joined
·
6,862 Posts
[email protected] Never had a valve cover off either...motor is 100% stock. I also did this with street tires. All my mods are in my sig.
 

·
Registered
Joined
·
131 Posts
With everything stock, my 94 went 13.8 with a Powerdyne pushing about 8 psi's

thats stock everything except 24 lb injectors and a 24lb calibrated pro-M bullet.
 

·
Registered
Joined
·
73 Posts
Before the mods listed in my sig., I would trap consistent 110mph.

The mods on the car at the time were:
Dynomax ultraflo cat-back
P600b 6psi
FRPP Headers
3:55's

New times with the new mods very soon.
Go Procharger!
 

·
Registered
Joined
·
705 Posts
I got 13.0 @ 108.1 with 2.15 60.ft with stock engine and v2 sq 8psi blower
If had power pipe and good injectors and practice hooking i could beat that time...
 
1 - 5 of 5 Posts
Top