Ford Mustang Forums banner

Automatic Overdrive to C-4 transmission SWAP

638 views 1 reply 2 participants last post by  N2O88 
#1 ·
OK I have a 91 Mustang coupe 5.0 AOD I took out and sold my AOD I bought a TCI C4 and a TCI 3000 stall . new 157 50oz flex plate . I installed a new B&M hammer shifter I have Moved my cross member up and re-tacked it. But I have a prob. there are 2 small Micro switches on the Shifter that allows the car to have reverse lights again and for the nuetral saftey switch. I have 4 wires coming out of the Plug that was in My AOD . does anyone know what wires will go to what Switch???? This is all I have left to complete my C4 swap.

Thanks so much if anyone knows this. or knows someone that does.

:confused: :confused:


http://hometown.aol.com/bodyman321/parts.html
 
#2 ·
Ack, I know exactly what you are talking about, as I cut mine to hardwire for and bypass nuetral safety with my previous toploader setup. THe other pair of wires was to the reverse, obvously. I could check for you if you can get an answer, but I am lazy.....he he. John91coupe gave me the info when I asked.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top