Ford Mustang Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
212 Posts
Discussion Starter #1
I'm looking for recommendations on a cam/head/intake for more streetable power up to 6000 rpm. The car is very light and has a basically stock (.030 over fresh rebuild) 1990 5.0 HO. (Check signature) The T-5 has the 3.35 first gear.

I'm thinking TFS Heads, TFS stage 2 cam and a ported Cobra Intake with a 65MM TB. What will this put to the rear wheels?
Is 280hp attainable with this combo?
I'm not sold on this combo and I'm open to suggestions.
Your advice is appreciated.
 

·
Registered
Joined
·
766 Posts
AFR 165's 58cc
Ed Curtis custom grind
Performer RPM intake
70mm tb, 77mm maf, 30# injectors
1 5/8 un-equal lenght shorties:mad:
2 1/2 exhaust no cats

That was good for 299.7rwhp and 330.1rwtq untuned last saturday on the dyno. I feel that about 305-310rwhp when I get it tuned.
 
1 - 2 of 2 Posts
Top