91-93 OEM mud flaps
1 - 12 of 12 Posts
Joined
·
314 Posts
I'm not saying it didn't happen, but I've never seen a Fox body that came from the factory with mud flaps. I was a Ford tech from 85 till 2012. I prepped new cars all the time, All vehicles that came with factory mud flaps Rangers, SUV's had them installed during the pre-delivery process at the dealer. I have seen mud flaps for Foxes that were out of the Ford accessories catalog.
Joined
·
8,371 Posts
I had a set of those from back in the day. Wow this brings back memories
Joined
·
1,334 Posts
I had them. This picture was around 2001/2002. They say Ford Motorsport, I remember I got them from the ford motorsport catalog. I haven't seen them in a long time. I liked mine as it kept all the crap off the side of the car.
1 - 12 of 12 Posts
Join the discussion
Recommended Reading
-
Hood-whacked
The Body ShopI bought the 90 LX to tinker with as I drove it daily. Then on Monday last week, the hood decided to fly up and make a mess of things so it's a bit more of a project now. It was originally Light Titanium but one of the previous owners had an cheap paint job applied along with some shoddy body...- 1
- 213
-
Chuckster76 · updated
-
Rear fenderwells welded to rear-pan?
The Body ShopTo whom may be able to help: I'm replacing the badly rotted floor pan sections where they meet the front of the rear fender well and inside rocker on my '86 Capri. I purchased the entire $450 '87 to '93 rear pan section to cut panels out of to replace my cars rotted sections. The rear panels...- 0
- 82
-
MercuryFox50 · updated
-
How to handle paint issue?
The Body ShopI either want to take it to Macco (one in my area has good reviews) or prep/buy the paint and spray it myself (I have a little experience). I might sell the car so i just want it to look a little better. I’m going cheap. What would you do? I’m fairly confident I could do the fender and rear...- 9
- 603
-
Possible GT to LX conversion questions
The Body ShopI'm fully aware of what's involved in the conversion and the possible hate from GT owners but here's my situation: I'm thinking of painting my '88 GT this summer. Unfortunately, the GT's urethane parts are beginning to suffer. The rear bumper is developing the classic sag in the middle. What's...- 4
- 246
-
Cover up firewall hole from clutch
The Body ShopI have swapped my car from 5-speed to a 4R70W and am trying to eliminate cabin fumes. What is a reasonable way to cover up the hole in the firewall from the clutch cable that does not involve welding? I bought one of those screw in grommets, but quickly realized there really isn't any room to...- 2
- 107
Join now to ask and comment!