[silverhemi]

I have a stock block 306 available. Fresh out of the shop at Charlie Pepper's Racing Engines. Internals are all forged. Has a DSS main support and ARP hardware. Has heads bolted up to it that will be used elsewhere, so pics are difficult at the moment. I do not want to disassemble it until there is a serious buyer..

$1600.

678-920-2696 -Derek
email [email protected]

 

[silverhemi]

ttt

 

[silverhemi]

ttt

 

[big-e]

What heads will the pistons work with and what Iis the part number on them

 

[silverhemi]

They will fit inline or twisted wedge. I will try and get the PN off of them later today.

 

[silverhemi]

Pulled the pan, but I can not see a part number on the pistons through the bottom...pretty sure they are stamped on top. It definitely has Eagle H beam rods, and the owner verified Wiseco pistons.

This is from a close friends build. Most of this motor came from a donor car. He did not like the way the cylinders looked in it, so he took everything out and had it redone. Bearings and rings were replaced with Clevite and Total Seal, and crank was polished back out. Has a new oil pump. and rear main as well.

 

[big-e]

Ok...but I need a part number I have highports heads and need to be sure.Thanks

 

[silverhemi]

He doesn't want me to pull the heads in case it doesn't sell, because he will use it like it is. That being said...
I am almost 100% positive they are 5012A3 pistons. That is also their only off the shelf 306 piston in the Pro Tru series. He is running Twisted Wedge heads so I know it works there.

 

[big-e]

Ok...I will call the piston co to be sure also are you firm on the price. Thanks.

 

[silverhemi]

Price is definitely firm....especially with it being fresh out of the machine shop and having the DSS aluminum main support installed. I will include the ARP head bolts w/step washers as well.

 

[maniac95]

Pm sent

 

[silverhemi]

Pm sent

Didn't receive a PM

 

[silverhemi]

Sold pending payment and shipping details.

 

[silverhemi]

SOLD