Ford Mustang Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
628 Posts
There are sooo many factors. Wheel offset, tire size, what control arms, what spindles, k-member, camber? Chances are you will need to spread, cut, fold and pull.
 

·
Registered
Joined
·
628 Posts
This.

Whats your setup look like? I barely fit 17x9 on the front of mine, '89 fender openings though. 94/95 spindles, stock k-member and control arms.
I have a Griggs k-member, MM non-offset fox FCA (because the k-member is forward offset), 17x9 wheels and 275 tires, 96-04 spindles and 2 deg neg camber.


 

·
Registered
Joined
·
628 Posts
Just installed 17x9.5 Enkie RPF1 (16.3 lbs). 38mm offset.

Nice wheels, mind if I ask where you ordered them from? I checked Tire Rack, however I can only find a 22mm offset. Are you using any adapters to keep the wheels centred i.e. I heard that these wheels are not hub centric.

Thanks,
I bought them used but they are in excellent condition. This place has a great price http://www.1010tires.com/wheel.asp?wheelbrand=Enkei&wheelmodel=RPF1 ($216 ea plus shipping)
A friend got a local Discount Tire to match the shipped price. I am not using any adapters.
 
1 - 5 of 5 Posts
Top