Ford Mustang Forums banner

valve springs

  1. Windsor Engine Parts
    Almost brand new set of AFR 8017 valve springs. Came on my AFR 185 heads for Foxbody. Driven less than 500 miles, taken off when supercharger was added. I upgraded to the AFR 8019 springs. These are perfect for N/A car. $75 OBO. Call or text (816)-977-5047 Hydraulic Roller Spring 1.290 O.D...
  2. 5.0/5.8 Engine Tech
    I am currently rebuilding my 99 explorer motor and am about to send my heads into the machine shop to get checked out. I have heard it's a good idea to get new valve springs and possibly roller rockers? What is everyones opinions on that? I am also looking for a good street/autocross CAM for...
  3. Windsor Engine Parts
    Ford Racing Valve Springs (M-6513-A50) New in box, never installed. $95 shipped to the lower 48. PM me for fastest response.
  4. 5.0/5.8 Engine Tech
    Hello, I just purchased a custom grind SBF cam for my engine, but it hasn't been grinded quite yet. Unfortunately it came to my attention that my Trick Flow assembled heads turn out to have a less than adequate valve train. They (heads) were sold as having a max lift of .600" and looking at the...
  5. 5.0/5.8 Engine Tech
    Need some help with my car. Does anyone have some used valve springs off of a set of 6037 edelbrock heads? Can anyone confirm what heads these are from the pictures? Have one valve spring that looks damaged. Car just started knocking last time I drove it. Would like to get it running again ASAP...
  6. Modular Engine Parts
    I have a set of 44cc TFS 2v heads. I was stupid and used stock head bolts with a lot of boost and lifted a head, lost interest, and now I'm parting the car out. Everything is sold except for the D1SC kit and these heads. I just got the heads back from the machine shop. I think they would have...
  7. 5.0/5.8 Engine Tech
    Hey guys, I'm now getting into the valvetrain of my rebuild and a major theme I keep hearing is that stock springs in E7 heads are CRAP. I was wondering if I would need new springs with my cam swap (218/218 duration, .456/.456 lift, 110 LSA) and if so what springs would work well. I have been...
  8. Windsor Engine Parts
    Got a few things to sell. 1.Trick flow .540" single coil valve springs 110/280 pressures 1.470" springs diameter. 55$ shipped ***SOLD*** 2. 7* valve spring retainers from a pair of Trick flow heads. 25$ shipped ***SOLD*** 3. 10* locks from Trick flow 25$ shipped. 4. Stock dog bones and...
  9. 94/95 Tech
    So i've had my eye on a set of valve springs by anderson motorsports, They will be used on my twisted wedge heads with a cam with the following specs. .516/.516 lift at 220/226 duration. The cam card calls for 110lbs closed pressure and 312 open. The springs i'm looking at are 150lbs closed and...
  10. Windsor Engine Parts
    Solid Roller Cam SOLD Comp Cams Solid Roller (351W/ 302HO) Billet Core Duration @ 0.050 248/254 Lift (1.6 Rocker) .616/.622 Lobe Separation 110 New Never Installed - SOLD
  11. 94/95 Tech
    I picked up a pair of GT40X heads and found out the springs on them are crane. The thing i'm worried about is if they have to much pressure for my cam.. It's the steeda 19 and calls for 110lbs closed and 312lbs open. These springs however are rated at 438lbs.. Is this going to be a problem? I've...
  12. 94/95 Tech
    hey everyone, so i'm upgrading my cam soon and i chose the Steeda 19. i'm in need of some new valve springs and i had a few questions.. The springs my cam card requires are 110lbs closed and 312 open. The lift on the cam is .480 with 1.6 rockers and the duration is 280/286. I've looked into the...
  13. Windsor Engine Parts
    ARP 7/16 Rocker Arms Studs with low miles on them- SOLD Pics: Uploaded with ImageShack.us Uploaded with ImageShack.us AFR-8020 Inner Blue Stripped Valve Springs with low miles on them- $40 Specs: 1.437 OD, .720 ID, 120# @1.800, 300# @ 1.250, Chrome Silicon, 1.090 Coil Bind, 325 Spring...
  14. 5.0/5.8 Engine Tech
    I recently purchased a set of AFR 1388 heads and notice that they have the inner blue stripped valve springs on them which have an 1.437 outer diameter and .720 inner diameter. I need to know what valve springs or valve springs kit to purchase for my cam specs which are: Anderson N-91 Cam Adv...
  15. 5.0/5.8 Engine Tech
    I'm getting ready to buy a good set of 1388 185cc AFR heads from a buddy of mine and was wondering if I was going to need a spring upgrade for this cam. And I've noticed that they're good to a 600 lift? XFI™, 236HR-14 Cam Style -Hydraulic roller tappet Basic Operating RPM Range -2,800-6,200...
  16. Modular Engine Parts
    Selling a set of cams and valve springs. I am 100 % positive the valve springs are brand new, but I'm not sure about the cams. They are still in the box and they appear to be unused. On the box: 102-502-9R F4.6S XE262AH-13 RIGHT CAM 102-501-9L F4.6S XE262AH-13 LEFT CAM Marks on one...
  17. Windsor Engine Parts
    These springs have less than 3000 miles on them. Part# 31400414. Dual valve springs with damper Specs Diameter...................1.460" Installed height.........1.800" Coil bind ...................1.100" Seat pressure............125# Open pressure..........365# (at 1.200"/.600...
  18. Windsor Engine Parts
    Used set of valve springs, set of 16, CRANE part # 99893-16. Dual spring, 1.460 OD, 110 lbs at installed height of 1.850". $65 shipped, Paypal credit/debit add 3%. Thanks
  19. 5.0/5.8 Engine Tech
    I have a 95 gt and i got a hold of a complete 95 cobra engine really cheap. i have a 93 cobra intake, is it worth swapping out the 95 cobra intake on it? what do you guys think of that i should do cam wise? I like the X cam but its way to big with 1.7s. i've heard the F cam doesnt have as good...
  20. Modular Engine Parts
    COMP Cams Beehive Valve Springs are revolutionizing performance street applications. With the valve control and reduced weight that Beehive Springs deliver, street cars are now able to turn more rpm and have higher lift camshafts while maintaining the stability of OE applications. The oval shape...
Top