Hello I recently got a 93 gt 5.0 gt40p heads gt40 intake and it has 30lb injectors also a pmas calibrated 30lb maf with a powerdyne 6lb supercharger running 6lbs of boost msd boost controller with retard knob to control boost timing Base timing is at 10.... Now I have it running ok but idle...

Recently I got off my lazy arse and dialed in the cold/hot start, IAC control and fuel table for better day to day starting and cruising. The engine now starts within 2 seconds hot/cold which is good considering it takes 3/4 of a second for the ECU to sync up to the cam/crank signals (dual...

Hello all, Quick question regarding SCT software Advantage III. Is there any reason why I couldn't use a base map tune for an 07 GT on any 2005-09 GT? The dongle they sent me is setup for an EVX1 ecu, and I'd like to keep it for my next 2005-09 GT, which may not be an EVX1 ecu, but still a 3V...

so i have an 89 lx and the only original parts are the shell and interior. on the inside it is a 94 cobra. after the build the entire engine has been ran through, cleaned up, and every bolt on you can imagine. top it off with a shot of nitrous, so my question is how whats my best options on...

I have a TWEECER RT that I purchased late winter early spring this year for sale. Due to my lack of computer abilities this was difficult for me to get going with the software. I did get it to connect to the car and was able to alter the idle( like they say to do when first starting out) I just...

For Sale: Anderson's Programmable Management System Series 4 Extras: -Anderson's Low Impedance Injector Driver -InterACQ Software for computer data logging $1000 shipped Packaged and Ready to ship PM for pictures, serious inquires only

Going to swapping a turbo piston and rod 351w into my 1995 GTS. I want to run e85. What are my harness and ECM options. Not knew to building cars, new to higher horsepower builds. Any help is much appreciated.

My project came to a screeching halt right after I bought all of this. I bought all of this new this past fall, everything is new in the box except the laptop which was just used to install and activate the Binary Editor and Flash/Burn software from Moates. The software license for Binary...

Unlocked and ready for a tune to be loaded. Was used for marauder but can be used for many different vehicles. The part number on the box is 9400. Comes with original box, and software cd. Asking $150 SCT Xcal 2 PM or text for more info. Photos and my number are in the craigslist posting when...

Ok guys, Im not sure this is the right section but i'll give it a whirl anyways. I have done a fair amount of research and am getting mixed signals and a little confused to be honest. I'll try to give as much info as possible so hopefully you guys don't have to do much searching. I'm looking...

SOLD!

My engine is going to be making 340-360HP. This will put me at about 87-93% :king: capacity for 24lb injectors. Is it worth the expense of upgrading to 30lb injectors? I have a Vortech MAF, so it's about $40 for the tube and $279 for Accel injectors, so $320. Accel injectors don't have the...

SOLD!

SOLD

Hey friends! I hope this isn't too long a post, lol. Any input is so greatly appreciated!!!!! I need some tuning suggestions and questions answered with my swap, I have done mad research for months and called many places and always get different answers. My questions are next and if you want...

I have a question involving Quarterhorse by Moates. To start off, I have a mildly built 302 H.O. cammed, roller rockers, hardened springs, performance valve job, gt40 heads and intake. I noticed it is running VERY rich. Would I be able to change the air/fuel ratio with QH? I also want to do...

Thanks everyone. Please help me out with this.

Bought some of the 60lb Smart Fire injectors and got screwed. Hoping someone out there has a set of the Sema Decka 60lb injectors they want to part with. EV1 style. Please PM me what you have and a price. Thanks for the help