Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 81 Results
  1. Windsor Engine Parts
    Howdy. I'm building a 351w. I already have a TFS 351w lower, but I need the upper half of the manifold. I'd prefer a Box R as that is what mine is ported and intended for. I could also use a R-series upper maybe with an elbow as this is going in a 95 GT. Thanks! Also: I need fuel rails Mike
    $999 USD
  2. Windsor Engine Parts
    Looking for trickflow lower intake Tfs-515l0001 thanks
  3. 5.0/5.8 Engine Tech
    This has been an ongoing build for a couple of years. I had intedned on starting a thread, though couldn't find the time. The build was essentially inspired by the stock bottom end build that @Rock4451 performed a few years ago, which for me spiraled out of control and took much longer than...
  4. Member Build-Up Projects
    I had initially thought I was going to get a build log started, update pictures, and be a proactive Fox owner……….. That was 2018, and it was only supposed to be an off season build. It’s actually been a whirlwind of a project, that turned into a multi-year and increased scope & budget project...
  5. Member Build-Up Projects
    I'm going to start documenting my build here and on a FB group related to foxbody mustangs. The background; I purchased my 1992 mustang back in 1997 or so and drove it as my daily for a few years. It went through a few combos over the years until I parked it and decided to get crazy with it...
  6. 5.0/5.8 Engine Tech
    Quick question, one of the rocker arms on my 302 has a bad bearing in the roller tip. unfortunately i cant seem to find a replacement (Trickflow brand) for it. Instead of replacing all the rockers arms could i just go with another brand in the same ratio (1.7) with no issues?
  7. Windsor Engine Parts
    I have a old school Downs upper intake with gt40 lower that has port work done to the head side. Also comes with 1" spacer. Works as expected. Very similar to the Ron Anderson (Anderson Ford) RAP intake. These were commonly referred as a "breadbox" intake. Private message me or text me for...
  8. Windsor Engine Parts
    Maybe 500 miles on it. Great shape. Will post pictures upon request soon, as it's coming out of my running engine this weekend. $200 Shipped
  9. Windsor Engine Parts
    Trickflow track heat intake for sale. In great condition. Used for 1 summer and switched to a bigger intake setup. Only hardware that will come with is the pcv fitting and some vacuum ports. $425 Shipped. Intake is off and ready to ship.
  10. Windsor Engine Parts
    Selling a Black TrickFlow Track Heat Intake. Upper part number is Tfs-sbf-Efi-2u. I purchased the intake and never used it. The guy I purchased from installed in it, but never drove the car so it's practically new. Comes with spacer, and temp sensor Asking $475. plus shipping I was only able to...
  11. Windsor Engine Parts
    looking for a trickflow stage 1 cam used in good condition
  12. Fuel System & Related
    Accufab 65mm throttle body W/ tps sensor....Great shape $160 shipped - you pay pp fees Trickflow Street heat intake - Great shape- all gasket surfaces already cleaned for you $350 I can give a better deal if you buy both! I should have a matching gasket kit for this throttle body and should...
  13. Windsor Engine Parts
    5.0 Trickflow Trackheat Upper, SN95 TB and Elbow Trickflow Track Heat upper intake with 1 inch spacer. no lower intake $225 shipped SVO elbow intake adapter for 94-95 mustang. $50 Shipped Professional Products 75mm Throttle Body for 94-95 mustang. These throttle bodies have a built in IAC...
  14. Windsor Engine Parts
    Looking for a Trick Flow Track Heat intake for my fox body. I am in the south suburbs of Chicago. Not looking to spend a ton, otherwise I would just buy a brand new one. Looking for reasonable offers. Looking to say somewhat local but I am not against a road trip if the price is right. Shipping...
  15. 5.0/5.8 Engine Tech
    Hello all, I have a question about head selection. I have an 82 GT 302 that's .030 over and has KB 116 pistons installed. They have a .200 dome height. A Lunati 00061 cam is also installed. The current heads are production E7 heads, I believe the last owner installed these heads before I...
  16. Windsor Engine Parts
    -Dart SHP block 408w, eagle 4340 forged crank internal balanced, eagle 4340 forged H beam rods, arp bolts, mahle -22cc forged pistons. Have brand new in box Total seal AP rings for boost($400). Also have brand new in box custom ground hydraulic roller cam for turbo setup made for this motor...
  17. Windsor Engine Parts
    Looking for a set of both 8.050" and 8.100" trickflow pushrods for my 351w build using a hydraulic roller cam. Let me know what you got. Thanks.
  18. Windsor Engine Parts
    I have for sale a set of aluminum Trickflow Track Heat 185cc heads. http://www.trickflow.com/partdetail.asp?part=TFS-51416410-C01 I bought these from another member here a few months back to finish my 351 build for my fox, but I got a really sweet deal on a trade in at my dealership for a new...
  19. Windsor Engine Parts
    SOLD!! new 347 build, trickflow top end SOLD!!
  20. 5.0/5.8 Engine Tech
    I'm rebuilding my 347 stoker with flat top pistons with -4cc valve reliefs. It's the long rod stroker. I have a set of afr205 with 58 cc chambers. And a trickflow track heat intake. The cam will be a custom ground one for my combo. Here are my questions 1 what lbs injectors will I need. 2 will...
1-20 of 81 Results
Top