Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 75 Results
  1. S197 and Coyote Parts
    For sale is a brand new input shaft for a T56 Tremec Magnum (ford). P/n is TUFM7310. NOT for a Magnum XL, will not fit. Incorrect order. Has brand new bearing and race with it as well. Any questions, feel free. Asking $300.
    $300 USD
  2. Drivetrain Parts
    Upgraded TK0 500 5 spd transmission with all the good stuff installed to make it even stronger compared to a stock TKO. Freshly built and fully inspected with several new parts recently installed from Hanlon Motorsport receipts to prove. ($2500 in parts and $1000 labour to install). Removed...
    $5,000 CAD
  3. General Mustang Tech
    I have a 1990 5.0 with the original motor and T5 5-Speed transmission. MILES: 202,000 Shortly after my rear end rebuild with 4.10 gears and a short throw shifter install, everytime i've shifted into 3rd gear and gave it gas, it quite literally whines up like a supercharger (sound is...
  4. Drivetrain Parts
    SOLD $1500.00 Used tremec tko II with pro 5.0 shifter. Transmission has approximately 6,500 miles on it. 26 spline input 31 spline output. Was working perfectly when removed. This transmission came out of a Superformance Cobra, mated to a Roush 402. Gear ratios are:3.27 1.98 1.34 1.00 0.82...
  5. Drivetrain Parts
    If interested, please PM me, don't leave a post below. New MGW shifter in the box for a TKO 600 - $165 obo + shipping (save $45!). SOLD
  6. Mustangs For Sale/Wanted, 1994-1998
    Pending Sale 7/18/18 INTRO: I have decided to sell my 1995 Mustang GT/Cobra clone as a roller. I have owned this car for over 12 years. It has been fun, but it is time to let it go. I have done a lot of work to the car, and it has been done correctly and with no expense spared. I know...
  7. Drivetrain Parts
    I am coordinating a group buy on either a Tremec box, installation components, or both. If you are interested and would be ready to buy within the next 2 weeks, please PM me. NO TIRE KICKERS. I am spending my own time helping Corral members, so please respect that. If you are interested, PM...
  8. Suspension
    Parting Out Turbo Project (lightweight brakes, drag suspension, more...) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands include Borg Warner...
  9. Electronics and Entertainment
    Parting Out Turbo Project (Autometer gauges, more) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands include Borg Warner, Greddy, Spearco, MMR...
  10. Exhaust Parts
    I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands include Borg Warner, Greddy, Spearco, MMR, etc. ... good stuff! Click on my username and you...
  11. Fuel System & Related
    Parting Out Turbo Project (Magnafuel 750 pump + reg + filter, 160 lb. injectors, more ...) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands...
  12. Power Adders For Sale
    Parting Out Turbo Project (Borg Warner, Spearco A2W, more!) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel pump/filter, vacuum pump, 4” exhaust, etc. ... good stuff! Click on my username to see my other postings. I will...
  13. Drivetrain Parts
    Parting Out Turbo Project (MMR TKO 900, Quarter Stick, more...) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel components, vacuum pump, 4” exhaust, TKO 900, and MUCH MORE. Some of the brands include Borg Warner, Greddy...
  14. Windsor Engine Parts
    Parting Out Turbo Project (Victor Jr. EFI, Vacuum Pump, more...) I am selling a ton of parts from a turbo build including turbo, wastegate, intercooler, two Victor Jr. EFI intakes, fuel pump/filter, vacuum pump, 4” exhaust, etc. ... good stuff! Click on my username to see my other postings. I...
  15. Drivetrain Parts
    G-force 0.75 ratio overdrive for T-5. Has some minor wear on synchro teeth. $200 shipped
  16. General Mustang Tech
    I decided to replace shift fork pads and blocking rings to the carbon fiber ones in my tremec 3550. All went well, was pretty cut and dry disassembly and assembly. Got transmission back in car and now 3rd and 5th seem to not fully engage. They will pop out of gear if you don't hold pressure...
  17. Drivetrain Parts
    Brand New Ford 3.55 gears..comes with ring and pinion, crush sleeve, shims and new nut - $120 shipped .....SOLD Brand New Ford Racing 31 spline carrier - I should also have new c-clips I'll throw in $200 Shipped.....SOLD Rear diff bushing TOOL New Never used $30......SOLD Used but good...
  18. Drivetrain Parts
    I am selling a Brand New Magnum T56, customer wants to go with an automatic now instead of the T56. Comes with a Quick Time Bell Housing for a Coyote/Mod Motor. BRAND NEW, no Oil, Never Ran, mocked up thats it. First 2800 takes it or best offer. Will trade for a used good Coyote Motor for...
  19. Drivetrain Parts
    I will have a liberty face plated Tko 500 with 5th gear removed for sale AFTER the Maryland NMRA race. All gears have been cryo treated $2200 obo. Also have a drive shaft that can go with it if it works for your car. Only selling to upgrade to G101a.
1-20 of 75 Results
Top