Ford Mustang Forums banner

tranny

  1. General Mustang Tech
    I have a b&m street strip c6 in my completely gutted notchback. They advertise it has a rebuilt front pump and governor, all new B&M high performance friction plates, new intermediate flex band, new low roller clutch with lube hole in inner race, new adjustable modulator, new bellville spring...
  2. Drivetrain Parts
    World Class t-5 with carbon fiber syncro's and billet keys. No miles, was going to used as a spare for my sn95 (also have an sn95 and was going to swap input shafts) but, going a different route. No pics as it is buried in storage. Includes Tri-Ax shifter. Can ship on someone else's dime if...
  3. Drivetrain Parts
    I have a t-45 tranny freshly rebuilt around 2500 miles on it, Also a PST Carbon fiber drive shaft along with a Centerforce - Dual friction Clutch cover and disc with around 250 miles on the clutch, This set up worked great for me, But I am going with the t-56 swap, I would take advantage of this...
  4. Drivetrain Parts
    94-95 AODE tranny. Shifts and works perfect. just pulled out. looking for $350 for everything. Pedals, tranny, flywheel, shifter, etc... Shipping can be arranged. located ontario, canada
  5. General Mustang Tech
    I will try to be as informative as possible. I own a 2005 V6 mustang, 155,000KMs on it. Prior to the problem I am currently in, I press on the clutch pedal and its nice and firm. I am able to feel the engagement of each and every gear. Yesterday I took my stang out for a drive, it drove as...
  6. Drivetrain Parts
    I have a Low mile TREMEC 3550 with all original paperwork for sale. It comes with a Lakewood Bulletproof Bellhousing and a New NAPA clutch. Im asking 1600.00 OBO Text or call 317-403-3222 NO TRADES Located in Greenwood,IN 20 min. South of Indianapolis Thanks, Jonathan
  7. Drivetrain Parts
    Steel flywheel from 8 bolt crank 03 Mach 1 - shows Nodular Cobra on the flywheel. This flywheel was from the forged crank 4.6 engine in Cobra's/Mach 5 speeds Make me an offer
  8. General Mustang Tech
    It has been awhile since I took my trans out of the car and I can't remember to correct way the bearing installs onto the fork.:confused: Everyway I install it (which I believe the bearing touches the pressure plate fingers??) it wants to fall out of those 2 prongs that are suppose to hold it...
  9. General Mustang Tech
    My T5 has started leaking pretty bad. I can't tell where from do to all the fluid evrywhere. It is somewhere between the collector (BBK longtubes) and the crossmember on the driver side. I thought it was the speed sensor but not 100% sure. I might have to drop the tranny and degrease it and hope...
  10. Drivetrain Parts
    SOLD! T45 Transmission with a 96-98 Cobra (and 99+ Mustang) tail shaft. The only difference is that the trans mount sits about 6 inches further to the rear than on a Mustang GT. After sometime in 99 all used the Cobra version. The transmission needs a rebuild and probably some parts...
  11. Drivetrain Parts
    Looking to buy the tranny mount bracket / exhaust hanger off of a 94 / 95 T5. Did a T5 swap and Im not happy with the modified AODE bracket. Post, PM me or email me at [email protected] Thanks.
  12. Windsor Engine Parts
    Ford 418w stroker motor. 13.1 comp., forged crank, h-beam rods, srp pistons. *****SOLD*****
  13. 94/95 Tech
    Buying parts to do the T-5 swap, and one article I read made it sound like the T-5 was a different length in the '94-'95 cars. I thought they were all generic and the bellhousing was different. Anyone know for sure? I've got a FRP World Class T-5 with the 2.95 1st gear ratio in my shop still...
  14. GT & SOHC
    I've been searching a lot and I seem to be finding mostly posts about people looking for places to built t45, kits to build them up or shops that will do it, not too much info about how to rebuild these things. I'm putting down 448 rwhp now and my king cobra clutch is just spinning, the trans...
  15. 94/95 Tech
    Okay guys.... just put a low milage 302 (which ran perfect) back in the old 95 gt... with an f-cam, MAF, injectors, TB, gt-40p heads, cobra upper/lower intake, and MSD ignition box and coil. The car had underdrive pulleys, no ac or smog, tremec tko 6000 tranny, 4:10 gears, i think an aluminum...
  16. Drivetrain Parts
    I got a new tranny for my truck, but it's a got a PA reverse manual VB in it. I am putting a stock VB in it. Will sell for $125 FIRM Located in Cookeville, TN ships same day as long as payment is received by 6PM.
  17. Drivetrain Parts
    Guys and Gals, I am looking for a good used T-45. Mine needs servicing and I'd rather just buy a used one for now. I'm in Northern Virginia and would prefer to avoid shipping. Thanks! JD
  18. Drivetrain Parts
    hey i got a t5 i need to get rid off shifts perfect the only reason im gettin rid of it is because i upgraded to a c4 mighty mite tranny is in ri can send pics if needed thanks.
  19. General Mustang Tech
    is the aod to c4 a good idea and if so what is the process. thanks
  20. GT & SOHC
    alright so today i went out to run a few errands and got done and took my car to a car wash and got done and on the way from driving home, my car started making this weird shrieking noise each time i pushed my clutch in. the car sounded fine after i put it in gear and drove but each time i...
Top