Ford Mustang Forums banner

torque

  1. Automotive Tools
    I have a Snap-On 1/4 torque wrench which was only used a few times, looks like new. Good for checking pinion preload and many other sensitive things where 0-50 in lbs is needed. Comes with case and instruction paperwork. $130 shipped with insurance Will put up pics when I can
  2. 5.0/5.8 Engine Tech
    Hello, I'm stumped, need some help to make a final decision. I want to get a new 4 barrel intake for my roller 5.0L. When I built the motor last year, I purchased new TW 170 FAC heads. Motor is 9 to 1 compression, I then purchased a custom cam, specs are @.050=215i & 223e, lobe sep=110 and...
  3. General Mustang Tech
    Hoping somebody can give me some insight on an issue. I'm looking for a stock torque converter. What i want is to know which factory vehicle came with the highest rpm stall with an aod trans. For example, over in the Chevy world of LS1's where I'm used to residing, you can pick up a converter...
  4. Drivetrain Parts
    I have a flex plate and converter I got with a trans i bought, can't use the flex plate and i have no need for the converter Flexplate is a TCI 28oz SFI, part # 529618 Converter is a TCI Super StreetFighter part # 451503. stall will depend on your application, but expect 3800-4400 depending on...
  5. Windsor Engine Parts
    I have an edelbrock performer efi intake that i used for most of my mustangs life and decided to take off because i wanted to get the new performer rpm 2. So up for sale is the old one, this is for the upper and lower intake, the lower intakes front left bolt hole is cracked and may or not be...
  6. General Mustang Tech
    I am trying to remove the rear LCAs and the bolt at the torque box is rusted inside the sleeve through the rubber bushing on stock suspension. When I turn the bolt the sleeve turns with it. Anyone have any good tips on how to get it out without torching the bolt? I've torched them before (on a...
  7. Drivetrain Parts
    http://store.summitracing.com/partdetail.asp?part=TCI-450700&view=1&N=700+150+ Part was installed and used to set the timing on a new engine. Had to pull the engine to replace a flywheel so i decided to upgrade the transmission to an AOD. Converter has virtually 0 miles on it. Car never left...
  8. Road Racing/Auto X
    I HATE THE EVOLUTION MOTORSPORTS (EVM) TRI-LINK ... look inside Take a look at these pics of my car and you will see why you should never buy a EVM Tri-link. Save your self the hassle and get a torque arm instead. First off, from the day I installed the tri-link (with the springs rates they...
Top