Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 45 Results
  1. Drivetrain Parts
    Looking for either a TKO 500/600 or a 3550 for a sbf, need one for my '70 Mustang with a 408w, cant find good deals locally for a 4r70w (in the market for one of these as well 👀) Located in Washington State, would prefer local but willing to pay for shipping, ready to buy asap.
  2. Drivetrain
    I’m searching for a tr3550 or tko500 preferably 10 spline as I want to retain my current clutch will upgrade down the line when more power is added. I am located in the Missouri area but can pay shipping.
  3. Drivetrain Parts
    Hello! Looking for a transmission for my 1970 Mustang. Built 408w running 550hp to the wheels, though built for a 200 shot of Nitrous/boost; the old Fmx finally went and I'm looking for an overdrive trans, looking to buy asap. Anyone with a 4r70w, tko (500/600 is fine), T56, etc. setup looking...
  4. Drivetrain Parts
    I'm looking for a Quicktime bellhousing for my TKO600 fox coupe. Running a 351w and need to get safer. Shoot me a text with pricing and photos of what you have. Thanks in advance, Dogman 512-760-5443 text
  5. Drivetrain Parts
    I need a TKO bellhousing and an Aluminum Driveshaft either 28 or 31 spline. This is for my 93 Reef Coupe Thanks Located in San Antonio TX
  6. Drivetrain Parts
    I will have a liberty face plated Tko 500 with 5th gear removed for sale AFTER the Maryland NMRA race. All gears have been cryo treated $2200 obo. Also have a drive shaft that can go with it if it works for your car. Only selling to upgrade to G101a.
  7. 5.0/5.8 Engine Tech
    I am doing research for my build. I have 68 fastback with a 351W, around 363 after machining. It produces around 400 HP with a redline of 7000 RPM. My transmission is a TKO-I (260 0708) which is listed for up to 425 lb-ft of torque but has the upgraded 26 spine input. I'm getting opinions on...
  8. Drivetrain Parts
    Spec Billet Aluminum SOLD! Tremec Aluminum Bellhousing SOLD! 96-98 V8 Manual Pedal Assembly SOLD! 96-04 V8 Clutch Fork, missing the little bolt on counter weight, $23 SHIPPED
  9. Classic Mustangs & Fords
    1968 Fastback 351w Engine rebuild questions I have a few questions about which direction to take my new project. I am purchasing a 1968 fastback from a guy who is abandoning the project. I am looking for suggestion on which way to go for my power train. First I'll give you some background. I...
  10. Power Adders For Sale
    PT88 MFS Turbo by Precision SOLD
  11. Drivetrain Parts
    I have a freshly face-plated TKO600 available. ZERO MILES. Gears, slider, shift fork upgrades all done by Liberty. Assembled by Tim @ MV Performance. Face-plated on gears 1 thru 4. Still has 5th gear installed. Also has bronze shift pads. McLeod SFI bell housing for SBF. Adjuster nuts welded...
  12. Drivetrain Parts
    Looking to pursue a built six speed, so I am looking to part with my five speed. It is new in box, only removed to take a picture. Info on the trans from MMR: This transmission has the .64 OD This is our street/competition transmission and the same that we use to hold the current record...
  13. Drivetrain Parts
    FOR SALE: Tremec 3550/TKO bellhousing, for SBF Part # E6ZR-6394AA I know it looks shiny in the pics. That's because I attacked it with a wire wheel for a good long time. It's not polished. $100, plus shipping from 97006. I take PayPal, plus 3% unless you send it as a gift. 503-481-0229
  14. Drivetrain Parts
    I have a tremec 3550 that I am selling, it started to whine the other day and I pulled over it will still drive and upshift and downshift in all gears. I was told by a local tranny shop they will rebuild it for $600. The transmission is at the shop now and I could get you in contact with them if...
1-20 of 45 Results