I'm planning to do some simple bolt-ons for my 02 Mustang GT, but I have never done this before and I am on a budget. I was enticed to buy BBK Cold air intake and the 73mm throttle body, but then I notices how it was cheaper to get the SR equivalence and their Plenum. I looked around and the...
I think I’ve decided on the emissions legal afr 185’s like these although I’m open to suggestions for any emissions legal heads that might be better. Anyway I’m starting to look at emissions legal intakes and fuel rails/injectors. I need to decide on the upper and lower intakes and also the kind...
I ran my codes the other day and got “Throttle position sensor out of range”. I have been trying to test it today and my multimeter is giving me just 0 for my reading. This is a brand new multimeter. I connected the positive to the green wire (dont have any sewing needles to pierce so I dug out...
I’ve got an unused BBK 1701 Throttle Body is like to sell that I am not going to use.
I paid $210for it.
$100 plus shipping.
It’s small and should cost much. Taking a $100 hit on this I can live with to get it off my shelf. My loss/ your gain.
Looking for a fox 80 or 85mm throttle body
Anyone happen to have an 80 or 85mm throttle body sitting on the shelf? I'd very possibly be interested in it. Or even trading my nice Holley 70mm and spacer plus a little cash for yours.
I've got a 70mm Holley Tb with a bbk/edelbrock spacer. Spacer has poor man egr delete and has the bottom bracket bolt cracked on spacer. Tb operates flawlessly but spacer does have a bad bolt hole for the bracket. 160 shipped. That's right at half price for the Tb before the 10 bucks to ship. If...
Used 62mm T body includes gasket, does not include TPS sensor about 8K miles on unit. In great shape was a spare I had for my 1997 Cobra, see pics.
$210 shipped to lower 48 states, I accept PayPal.
Fits 1996-2001 SVT Cobra, 2001 Bullitt, and 2003-2004 Mach 1
76mm Mass Air, Full '89 Wiring Harness + A9P, SN95 Wiring harness and Comp
EFI Mass Air Foxbody and SN95 Parts for sale.
- 76mm C&L Mass Air Meter in near new condition 70.00
- Stock 5.0 HO Intake - Clean and ready to run 10.00 (or trade for something cool)
- SN95 Ignition Coil 10.00
Selling my Trick flow Street heat intake 1500-5500 RPM along with a EGR delete plate and a 70mm TB.
I also have a 75mm mass air for 42 Lb. injectors, it is an older Pro-M.
$450 for the intake
$500 for the intake, EGR delete, and TB
$600 for everything
please Text before 6pm.
Looking to sell a few items from my stock 04 Lightning
1. Camshafts both banks with springs and retainers
2. Egr, Egr Tube and egr solenoid
3. Exhaust manifolds right and left
4. Valve body with no modifications
5. Lower blower crankshaft pulley
Listed items have just under 30k, all items are...
What are pros/ cons of putting an larger throttle body (75-80mm) on my 98 4.6L DOHC?
Mods: ProCharger PSC-1 (full system installed; fuel pump, management system, etc..) ; Borla exhaust, header - back
Stock everything else. Bought as it currently sits and a dyno sheet of 390 RWHP. It is very...
87-93 Accufab 80mm Throttle Body sold
I am selling my Accufab throttle body that i recently pulled off my car since I went carb. It is 80mm with a 4" inlet. It is in good working condition. It comes with a 90mm egr delete/cable bracket spacer as well.sold