Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 49 Results
  1. Windsor Engine Parts
    Looking for a good set of shaft rockers for Twisted Wedge R series heads.
  2. Windsor Engine Parts
    I have a long runner Trick Flow R upper intake for sale. It's grey and comes with studs and bolts to mount to your lower. Asking $200 plus the ride.
  3. Windsor Engine Parts
    I am selling my Trick Flow Box R intake set up for a 8.2 engine. It is in great condition. I went carb and have no use for it. The upper is powder coated black. There are a couple spots on the front and rear that the hood was rubbing that you can see in the pics. All hardware is included as well...
  4. Windsor Engine Parts
    Set of used bare casting TFS 60194 5.0/302 cylinder heads from the late nineties. Used sparingly on a 5.0 set up before going to an aluminum set up. See attached info sheet regarding the specs for these heads. Studs and guides (pictured) have been removed and not included. These were the heads...
  5. Windsor Engine Parts
    354" SBF Short block: 8.2 deck A4 Motorsports block, HTC 4340 crank, Eagle H beam rods, JE 9cc dome nitrous pistons, .700 lift Comp solid roller nitrous grind cam, Comp .904 Chrysler link bar lifters, all ARP hardware, 7 qt. pan with pickup, SFI balancer and flex plate, new rings, new bearings...
  6. Exhaust Parts
    I'm looking for a set of long tube headers for an 8.2 deck engine with TFS High Ports in a Fox body mustang. Anybody have a spare set laying around? 979-709-2508 or [email protected]
  7. Windsor Engine Parts
    Trick Flow "R" heads ported SOLD!!!! I have a set of Ported Trick Flow Twisted Wedge R-series heads for sale. are setup for hydraulic roller. These had been on a 347 turbo car that i purchased and parted out after a crash. The engine and heads came from Mike Murrillo. I don't have flow numbers...
  8. Windsor Engine Parts
    225 TFS High Ports ported by TEA they flow 335 have brand new comp. solid roller valve springs install height 1.9 in them, 66cc,2.08 valve INT 1.60 Ext,titanium retainers, 7/16 rocker arm studs, and high port guide plates. Aluminum 1.6 Gold comp. roller rockers also available. Call or text for...
  9. Windsor Engine Parts
    TFS Hydraulic roller Link-bar lifters I have a set of TFS hydraulic roller link bar lifters for sale. I bought this lifters from a guy on hardcore50racing last year. They only have motor break in time and one 1/8 mile pass. I had one pair of lifters to mess up so I only have 7 pairs. One pair...
  10. Modular Engine Parts
    I have a set of 44cc TFS 2v heads. I was stupid and used stock head bolts with a lot of boost and lifted a head, lost interest, and now I'm parting the car out. Everything is sold except for the D1SC kit and these heads. I just got the heads back from the machine shop. I think they would have...
  11. Windsor Engine Parts
    Great condition! Comes with both upper and lower intakes. Does not include sensor and stuff, just the intake kit For 302 engines (coming of a 1992 GT 5.0) $350 shipped (US only)
  12. Windsor Engine Parts
    I have a trickflow stage one cam for sale. I was going to use this in my build but decided to run a Steeda 19 instead. The cam is in good shape with some minor scuffs on a few of the lobes from being installed and taken out, nothing that i can catch my fingernail on. They would probably all come...
  13. Windsor Engine Parts
    TFS high port 225 heads fresh with new valve springs, stainless valves, and titanium lock. Heads were done by TEA I have flow sheet and receipt! These heads went low 8s on sbf 80mm turbo mustang Call 201-538-5487 $1999 with rockers!!!
  14. Mustangs For Sale/Wanted, 1987-1993
    This is my baby and I hate to sell it.. I just finished the build, and now my situation has changed and I have to sell it.. It has 500 miles on the motor and 90k on the car.. It was completely stock when I bought it.. Very clean inside and out. All work was done by Ramsey's Performance in Tampa...
  15. Windsor Engine Parts
    Posting this for a friend, hes got a set of TFS TW 170cc ( isky springs, titanitum retainers, harland sharp 1.6rr's hyd roller setup) , but just got a 331 shortblock, wants a set of 205cc heads for it, hes got money said $1500 is hisl imit due to the entire car budget, but also is willingif...
  16. Windsor Engine Parts
    Brand new in the box AFR 205 Outlaws 58cc. Set up for solid roller. I hate to sell these but I just had a baby and my project is being put on hold for a while. Will sacrifice at 1600 shipped. Just in time for Christmas. No low ballers please. Can text pics when I get home from work. My number is...
1-20 of 49 Results