Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 87 Results
  1. SVO/2.3L
    My engine runs fine when I start it and sounds good, after 4-5ish minute it starts missing and stuttering. I replaced the spark plugs recently I don't know if thats the cause or what?
  2. For Sale .

    Mustangs For Sale/Wanted, 1979-1986
    .
    $1,234 USD
  3. SVO/2.3L
    I just got my 86 SVO running again after sitting for a few years. I installed an aluminum drive shaft years ago. One thing I forgot about was the terrible vibration / noise on deceleration when in gear. It does not do it on acceleration. Noise appears to be coming from the tail of the...
  4. Turbochargers
    Can I clock a stock 86 svo turbo? I just bought a FMIC and need to clock the turbo but after loosening the cold side it spins fine, I go to loosen the hot side and it won't budge. I've been trying to pry at it with a pipe wrench, a lot of torching, and tapping with a hammer to break it free and...
  5. Power Adders For Sale
    Looking for a NPI 4.6 2v Blower for a 96-97 Thunderbird....I know there was a recent post just hoping to find one. PM me
    $1,234 USD
  6. SVO/2.3L
    Hi, new stock pressure fuel pump. new plugs/wires. when I do a pull in 2nd and slowly roll into boost it seems to boost then cut and bog and make a rpm limiter sound. and so on for all the rest of the gears but worse
  7. Power Adders For Sale
    In desperate need of finding an SVO/Ford Racing Supercharger Kit Hopefully someone out there still has one
  8. Exterior Parts
    We have several NOS Ford sets of 1985.5-1986 SVO headlights, turn signals and side marker lights. These are sold in 6-piece sets only. $1499.99/set plus domestic shipping. V, MC, AmEx, D and PayPal welcome.
  9. Windsor Engine Parts
    205 /72cc afr headed windsor, .030 over, eagle crank/rods, arp studs, canton fox oilpan, 157tooth flexplate, rpm balancer, comp hyd roller lifters, comp pushrods, crane gold and comp. roller rockers, ford motorsport valve covers, msd 351 distributor.... NEEDS 180$ WORTH OF BEARINGS, NOT...
  10. SVO/2.3L
    Hello all. I am new to the forums and not sure exactly how all of this works but...here goes. I've owned several Fox bodies in the past however I have been given a unique opportunity. I recently found a Silver 1979 Factory Turbo Mustang Hatch in a shop/barn. I am unsure of milage or what it...
  11. Windsor Engine Parts
    NOS Ford Motorsport SVO 5.0 Intake plate. Bought this years ago and never installed it. Still in its wrapper. $100.00 OBO Will take paypal/cash/bank check. Shipping extra. Local pick up available (20186)
  12. Windsor Engine Parts
    I have a no name, but forged, 351W / 408 SVO crank in excellent condition. 4" Stroke External 28oz balance 2.75" Main Journals 2.10" Rod Journals STD/STD Motor made 675hp at the flywheel with this crank on the dyno. Keeping the timing gear in the picture. $320 Shipped [/URL] [/URL]
  13. Modular Engine Parts
    Hey guys...I have a set of very rare 4.6 SVO heads that were the Ford Racing performance heads for the 1996-98 mustangs! They are bare and will need the cam journals fixed. The journals show signs of wear and oil starvation. I have a local machine shop that has the equipment to fix the heads by...
    svo
  14. 2.3L Engine Parts
    Have a 2.3l build motor it is as of right now a short block. Head is ported stock valves and springs. asking..$3,500 pieces assembled price is negotiable have $4,000 in parts alone. please serious buyers only contact for pics and any info. Bottom end *2.3l block *Magnafluxed *zero decked...
  15. General Mustang Tech
    Alright so ive just recently purchased an 86 svo. Car is all stock, with the exception of a 3" downpipe. When i purchased the car it ran wonderful. Not a skip or hiccup. Now that shes home, she wont start. Ive checked spark, and its there. Fuel gets all the way to the rail and fouls the plugs (...
  16. Drivetrain Parts
    I have a set of brand new Moser 31 spline axles "Saleen, SVO, Mark 7" length @ 30 3/8" with studs. I bought them off summit about 3 years ago when I built my rear. The car has been in restoration and I've decided to put a different wheel tire combo on the car and in doing so, need to get a...
  17. Wheels and Tires
    Any body know if i can run 5 lug draglites or pro stars on a 86 mustang svo stock suspension? If so got any pics? Need measurements of rims if welds fit
  18. 2.3L Engine Parts
    Looking to buy a running 2.3L Engine. Doesnt need to be anything special just no major problems. I will be using this motor as a daily driver for a bit while i build something for it. PM me with details and pics if you can, I will come and get it out of your garage w/e i can also come pull it...
  19. Windsor Engine Parts
    I have a new in the box Ford Racing/SVO billet timing chain. Part number is M-6268-B302 9 way adjustable crank sprocket. Billet steel crank and cam sprockets. This set has the higher quality Rolon chain. $65 shipped to your door.
1-19 of 87 Results
Top