Ford Mustang Forums banner

suspension

  1. Suspension
    Looking to purchase a used inexpensive k member for my 92 foxbody. I will be using the stock motor. Thanks
  2. Handling
    Hey all, just have a quick question I couldn’t find an answer to, hoping y’all can help. I have a 90 GT with a turbo coupe rearend that’s lowered maybe an inch. My question is, does anybody know if a maximum Motorsport panhard bar kit will bolt up as it should/would with the stock mustang...
  3. General Mustang Tech
    Hi all, 1990 Mustang GT Hatchback: I installed a Ford Racing Spring / Tokiko Shock/Strut kit 10 years ago, the ride height has always been low in the back and high in the front. It has C springs in the Front and B springs in the rear. I cut a decent amount of weight by removing AC, Smog Pump...
  4. General Mustang Tech
    TL:DR - Rear suspension problems, need diagnosing help. Ever since I bought my 96 GT I've been feeling something 'off' in the rear end, something suspension related. Basically, when I drive the car, and more predominantly noticed when cornering or hitting a pretty solid bump... something in...
  5. Suspension
    SOLD Installed last summer and have less than 500 miles. They are in like new condition with no defects and normal installation marks. Only selling because I want a different ride than coilovers can provide. *NOTE: You will need caster camber plates with spacers to complete installation (LMR...
  6. Suspension
    SOLD - Slightly Used Eibach Sportline springs + Isolators $250 please remove post. Thank you
  7. Suspension
    Listed are PROTHANE* 19-405-BL End Link Set 3-1/4" Mounting Length. Fits early model Ford Mustangs and other vehicle applications listed below. New in sealed Packaging. $20 (Help me with the cost of shipping from Northern VA - 22152) Looking at Prothane.com, this fits multiple applications...
  8. Suspension
    Hey guys, I have Maximum Motorsports Sport series rear Lower control arms for sale ,part number: MMRLCA-102, new, never put on a car just taken out of the box to check if i got the right ones. Never got around to put them on my car. Also have bare full length subrame connectors still in the...
  9. S197 and Coyote Parts
    Recently lowered my 08 Shelby GT500 and replaced virtually the entire suspension in doing so. My car only has 12k miles so the removed parts are in good shape and not worn out. I have the front struts (assembled), rear springs, rear shocks, lower control arms, and panhard bar. It is my...
  10. S197 and Coyote Parts
    New, sealed in plastic (1 removed for photos) Steeda 555-8210 HD strut mounts. Steeda indicates these fit 05-10 GTs and 07-14 GT500s. I no longer need them since I sold my car before putting in front struts/springs. These things are heavy and definitely sturdy, well-built pieces. Asking $200...
  11. General Mustang Tech
    So i have a 1990 fox body mustang gt and i have this horrible vibration. At about 50 mph the car inst bad you can feel it just barely. But 60+ it is horrible the gear shifter is vibrating like crazy and the steering wheel just started to shake up and down and kinda all over the place. I know...
  12. General Mustang Tech
    When installing my eibach front sway bar it says to but the new bushings into the stock mounting brackets, I cant get the bushing into them is there a secret that I don't know? Thanks Spitz88
  13. Suspension
    These are AFCO rear coil overs that came off my SN95. I can not testify to the condition of them as i did not buy, install, or uninstall. They look to be in excellent shape. The former owner said the rebound was not set correctly hence the reason they were pulled off. I do not know the how long...
  14. General Mustang Tech
    Total newb here. I saved my lunch money went and blew it all on an 89 GT convertible in rough shape and started dumping my cash in the motor. After 2 years of working on her I got it on the street. I had Kim Barr Racing Engines out of Garland, TX build my motor. I did the rest. My main...
  15. Suspension
    Has a set of like new qa1 caster camber plates for 79-89 mustang they have less than 100 miles on them car spent most time on dyno. Part number cc100mu 120 shipped Also can come with new Monroe struts for $40 u just pay shipping Contact 6305818790 All stuff can also be picked up locally...
  16. General Mustang Tech
    Hey Community! I have not posted in a long time, because I wanted to figure out the issue on my own. I have a large amount of play in my steering, about 2" or so. I've had it since as long as I can remember. I have honestly searched every thread, forum, online video, etc. that I can possibly...
  17. Suspension
    DISCLAIMER: I am located in Canada! This makes shipping expensive so I can't eat up the shipping cost :\ Just shoot me up some offers on whatever you're interested in and leave me your state/province zip-code and I'll respond with a quote for shipping. I'm not expecting much for them because...
  18. Mustangs For Sale/Wanted, 1987-1993
    Foxbody LSX PARTOUT K member with tubular a arm Aje. $500 Aeromotive fuel system a1000 pump -8 and -10 lines pre and post filters 15gal fuel cell seek motive fuel regulator $650 Upr pro series rear suspension adj upper and lower. $200 C4 Trans mission billet input shaft rev man vb...
Top