Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 319 Results
  1. Superchargers
    I have gave myself a break from the car the past few years. Just got burnt out building it and wanted to finally enjoy it. I am ready to start tackling some issues again. SC fox with AFR heads. Runs good, but MA temp is through the roof! I told the EFI to not pull timing till 187 degrees...
  2. Mustangs For Sale/Wanted 2005-Present
    2006 Mustang GT making almost 700 horse and putting down just over 550 to the wheels on 93 octane pump gas. The car shows like a new vehicle, only 59k miles and always garaged and only driven in the summer months. This car has a lengthy build sheet including a Magnuson blower, comp cams, high...
    $1,234 USD
  3. 5.0/5.8 Engine Tech
    Figured I would get more traction here than the power added forums which seem slow. Car has been built for over 3+ years. Motor is stout and made a bout 385/400 to the wheels with the intention of doing boost (9:1). Because of life, I haven't gotten around to a power adder. Car is 100% street...
  4. Superchargers
    I need to know what size belt for a 96 gt with a v1 vortech 3.25 pulley. It has a k061123 on it. But it shredded. Ordered another one it’s dayco but from reading other peoples post no one has an answer. Idk if 112” is right. Does it need to be bigger smaller or what. Or is that the right one?
  5. Power Adders For Sale
    Looking for a d1x with brackets for my foxbody
    $3,000 USD
  6. 5.0/5.8 Engine Tech
    Im at a dilemma for a choice I have to make in the future, im trying to decide between a turbo or a supercharger, and if a super charger should it be a roots, twin screw, or centrifugal. My main problem is budget, I obviously don't want to spent like 8k on forced induction, so what would be the...
  7. Power Adders For Sale
    Everything you see here. I have a 130amp alternator & smog pulley available. Bought this kit used on this forum years ago & never used it. All of the important parts are there along with a hodge podge of items. Head unit is V-1, 6rib. Not sure what brand pulley is on it. Pulleys should make 10lbs.
    $1,000 USD
  8. Power Adders For Sale
    Vortech 8 Inch 8 Rib crank pulley, accessory is underdrive. $200 OBO. Also selling a Vortech 8 rib 2.75 supercharger pulley $50. Call/text 816-977-5047 shipping from 64118
    $200 USD
  9. Power Adders For Sale
    Bought this kit back in August, 2020 to install on my 2003 Crown Vic (Romeo engine). Unfortunately, I had to sell the car before I could install it. The condition is brand NEW in box, with everything still in the packaging as it arrived from Tork Tech. See Mustang Supercharger Kits, GT, Cobra |...
    $2,000 USD
  10. Power Adders For Sale
    Paxton Novi 1000 for 87-93 foxbodys. Will come with FordPerf EV6 style 47lb injectors with maybe a couple thousand miles on them, practically new. Would just need the $40 adapters to make them work with stock fox injector harness. Comes with everything needed to bolt on and go would just need a...
  11. Power Adders For Sale
    Department of boost GT550-S 550-600HP Supercharger System for 2015 to 2017 Mustang GT. Kit has never been installed as I am going in a different direction with my build. The kit comes with everything to complete the install. The full list of base install parts and install steps are located at...
  12. Fuel System & Related
    Selling my 3" PMAS blow through MAF sensor. Only has a few hundred miles of use. Went to full stand alone and speed density so don't need anymore. Has adapter connector for Fox Body style MAF, uses the newer style Ford MAF sensor with integrated IAT sensor that can be wired up for charge air...
  13. SVT & DOHC
    Hi everyone , I am relatively new to the muscle car scene I purchased a 96 cobra with 80 k original miles or 130,000 kms as I’m located in Canada , I am contemplating between getting a KB or going the pro charged or vorthech route , the KB is nice as the conversion rate between USD and CAD is...
  14. Superchargers
    I have seen similar threads on the Eaton M90 from a 3800, and I was at the local junkyard and I passed by a Jaguar S-Type with a roots SuperCharger. From what I could find on google the SuperCharger is a version of the Eaton M112. It is bolted to a 4.2 Liter V8, which to me raises the question...
  15. Superchargers
    Hey everyone my first post here hope I’m doing this right. My names Todd lawheed I have a 1963 ford ranchero body that’s swapped onto a 98 5.0 v8 awd frame and drivetrain. I’m looking to buy a intake that allows me to adapt a m122 to my engine. 805-440-8260 is my cell and lawheedtodd93@gmail.com...
  16. S197 and Coyote Parts
    Like new ATI Super Damper 8 Rib 10% OD w/6 rib ac. 11+ Mustang GT Coyote 12-13 Boss Cobrajet 11-13 F150. May fit other year coyote applications. Sfi rated. Pn 918052. SOLD
  17. Power Adders For Sale
    Passenger side mount , custom billet pullies and brackets for 351 9.5deck. Twin plate novi 2000 custom Anti flex brackets . 7.5 crank pulley, 3.15 billet anti slip high traction pulley as well as brand new 2.95 vortech renegade pulley in the box. Custom billet 5” idler for max wrap on blower...
  18. Power Adders For Sale
    In desperate need of finding an SVO/Ford Racing Supercharger Kit Hopefully someone out there still has one
  19. Power Adders For Sale
    Looking for an SN89 or SN92 and any associated parts. Any condition so long as it's rebuildable is OK. Thank you.
  20. Power Adders For Sale
    Update 6-12-20 i will now be adding my Paxton Air to Air front mount intercooler, all piping to intercooler and from intercooler to throttle body, 3” hpx pmas tube and hpx pmas slot style MAF, custom coolant crossover tube to fit supercharger, and two Ford Gt Supercar fuel pumps. -you will only...
1-20 of 319 Results
Top