Ford Mustang Forums banner

stroker

  1. 5.0/5.8 Engine Tech
    Hey guys. Wondering what I should use for parts for my 410w build. This is what I have so far. I dont want crazy power. Maybe around 500-600whp with boost. Something that will last and not break the bank. I have a 1991 Ford Bronco with a 351w non roller. Im looking to build a 410w as I already...
  2. 5.0/5.8 Engine Tech
    Hey everyone, While I was in college a buddy of mine blew up his stock fox and I picked it up for $1500. It has lots of goodies, tubular k member, control arms, baer brakes, etc.. It was too good to pass up. Now I've graduated and its time to get to work. While I was in school working my...
  3. 5.0/5.8 Engine Tech
    Just about to wrap up my first 408w build. I was hoping that someone has built or knows of a set up comparable to mine and could give some insight on power numbers as my last major hurdle is deciding on a big money manual trans or a manual valve bodied 4r70w. 351w stock block bored 40 over...
  4. 5.0/5.8 Engine Tech
    Hey guys building a 377w svo 9.5 block bought a shortblock dont know much about it has build sheet but not alot written on it has eagle rods and a ford racing crank. Has venolia inverted dome pistons. Was wondering what size combustion chamber would be the best for boosted application. Want to...
  5. Mustangs For Sale/Wanted, 1979-1986
    SOLD
  6. Classic Mustangs & Fords
    Hello All, Does anyone know if you had a 351w in 69-70, what would've been the biggest stroker build possible in that time period? I know now days, with a 69-70 block you can get it out to 427 (most would recommend the 408.) Were these configurations used then or smaller ones? If you...
  7. Windsor Engine Parts
    I have a 414" sbf for sale complete from carb to oil pan...and either a flexplate for you auto guys or flywheel for you stick guys! Fresh motor...has "0" miles on it....was only started in the driveway for about 30-45 min to break-in. Shortblock was built by Gunther's Machining & Rebuilding...
  8. Windsor Engine Parts
    SOLD! I am parting out my 1987 Mustang GT that I bought when I was 17 (30 now) in order to pay for my wedding. This is the listing for the engine. The engine can be bought as a complete engine (without front accessories) or longblock, or shortblock only. Engine is currently in the car and runs...
  9. 5.0/5.8 Engine Tech
    Hello Corral, I know I've posted on the subject before but have since then returned from basic training and have begun settling at my new station and am finally ready to begin the project. I am looking to keep this engine build somewhat "budget oriented". I use the word "budget" lightly as I...
  10. Windsor Engine Parts
    347 stroker w/ stock block Scat forged crank from machine shop still in bag Forged Ross XL400 pistons (accepts TW heads too) Not sure who makes the rods Main studs w/ main girdle Main caps were grinded for more surface for the girdle to contact Cam bearings were changed Crank was cut I believe...
  11. 5.0/5.8 Engine Tech
    Hi everyone, I am currently in the middle of building my first stroker motor. I have the block off to the machine shop and I am ordering my kit but I have never driven a 331 stroker nor have I ever been in a 331 stroker. I have been in a 347 stroker and i know they are similar but I don't know...
  12. 5.0/5.8 Engine Tech
    Hey all im beginning to build my motor im turning a 351W to a 408 Stroker motor i want to keep efi, i plan on putting a supercharger at some point in time. if any body can help with suggested to help out id appreciate it. its gonna be going in a 1994/5 if anyone has any tips or issues theyve ran...
  13. Member Build-Up Projects
    I have a 87 Gt with a 93 Gt motor and transmission. I`m buying a Dart 363 Bare block and i`m looking for suggestion and ideas on which parts can get me to my goal of around 600-700 rwhp daily driver (ex. cam, pistons....) also a good trans combo for this
  14. Windsor Engine Parts
    Never ran Windsor Jr heads $650...SOLD Used Windsor Sr. heads $650...PRICE REDUCED TO $600 Felpro 1250 gaskets Felpro 1262 gaskets Sweet looking cobra dizzy wire cover $55 shipped? Not sure if this a production part or homemade but would be a nice touch for an engine compartment either way...
  15. Windsor Engine Parts
    I am selling my pair of nicely ported Trick Flow 206 R heads. I have had these since they were brand new. I thought I could make them work with my combo but they are just too big. I cant spin the motor high enough to take advantage of them. I put about 500 street miles, a handful of dyno pulls...
  16. Mustangs For Sale/Wanted, 1987-1993
    1990 LX 5.0 Speed for sale SOLD SOLD SOLD SOLD
  17. Windsor Engine Parts
    I am toying with the idea of selling my engine and going a different route. It is a fully built 327 cubic inch stroker. Same as a 331 but with a standard bore. The engine has very little time on it. A handful of dyno passes, 3 track passes and about 500 street miles. Here are some specs on the...
  18. Windsor Engine Parts
    I have a used set (8) pistons for a 408w stroker. With my stroker setup, I couldn't get the quench I wanted so my machinist recommended I get different ones. Probe 12357-030 SRS pistons. They are flat top with valve reliefs. come with wrist pins and locks. 12357 - Ford 408/427W -4.0cc Flat...
  19. Drag Racing
    I'd like some expert advice on my 1995 Mustang Cobra. I've taken the car to the track once (with Bama tune only) and ran it 3 times with my best time below. R/T: .398 60': 1.884 330: 5.522 1/8: 8.502 MPH: 83.48 1/4: 13.236 MPH: 105.88 current stock items: ported stock cobra intake fuel pump...
  20. Windsor Engine Parts
    T/K 347 SBF with fogger for sale Stock E7TE roller block Eagle crank and rods Main girdle Probe pistons 11.0:1 comp ratio 7 quart pan Twisted Wedge aluminum heads, 2.02/1.60 valves Crane 1.6 rockers with girdles Mechanical flat tappet nitrous cam (don't know specs) Edelbrock Vic Jr...
Top