Search Results for ‘sohc’

im having and issue with high fuel pressure on my 05 v6 mustang some times it is at 50 psi most times 62-67 psi, check frps with a mechanical gauge wich the gauge was 8 psi under ive read that is normal, in key on engine off the pressures were exactly the same . went to do a continuity test for...

im having and issue with high fuel pressure on my 05 v6 mustang some times it is at 50 psi most times 62-67 psi, check frps with a mechanical gauge wich the gauge was 8 psi under ive read that is normal, in key on engine off the pressures were exactly the same . went to do a continuity test for...

After installing an aftermarcket steering wheel the speedo quit working. Deleted the horn/cruise control. Would the new wheel cause the VSS to fail? All wires are capped and tucked away. I also got rid of the radio.(radio harness isn't plugged into a radio is all.) -Thank you in advance.

I have a good Reichard Racing intake complete with polished accufab TB $1000 for the setup.Only reason for selling is I’m wanting to run a Trick Flow/Bullitt style setup on the 2V before I do the Coyote swap.

Victor Reinz GS33401 OEM cylinder head bolts for Ford 4.0 SOHC. Same motor used in Explorer & Mountaineer, Ranger/B4000, and 05-10 V6 Mustang. Factory head bolts are torque-to-yield bolts and are NOT to be reused. 1 box of bolts for each cylinder head. I have both sides. Will not separate...

I have a P1-SC and a pulley stamped '3.00'. Car is a '99 GT SOHC. What size belt is recommended? Thanks for your input! JB.

SOLD!

So I have a 2000 Mustang that was originally a V6 fast forward to now I just finished Installing the 4.6 SOHC V8 everything functions perfectly except convertible top. Donor car was not a convertible so what needs to change?

So I have a 2000 Mustang that was originally a V6 fast forward to now I just finished Installing the 4.6 SOHC V8 everything functions perfectly except convertible top. Donor car was not a convertible so what needs to change?

So I went to start my car this morning and when it started it blew out a cloud of blue smoke. Before installing my heads I had them resurfaced and rebuilt. Any ideas?

This turbo kit started as a turbonetics kit but has been modify to fit a automatic transmission. The piping Is stainless steel and has a 3 inc down pipe the kit will come with a cut out and turn down. It no longer has the small turbo on it it now has a billet 67mm duel ball bearing precision...

$750obo Local pick up, will meet up to 20 miles for faster response please call/text 626-353-2114

Brand New in box, never installed on car $100OBO will email pics if interested. Used 70mm BBK Throttle Body 99-04 Mustang GT $100OBO Used chrome MAC Cold Air Intake 99=04 Mustang GT $50OBO Used UPR Off Road X pipe 99-04 Mustang GT 5spd $75OBO PM me if interested.

700 picked up or delivered in the dfw area

60 shipped. does not have filter and comes with maf 972 824 9870

Hello Mustang Enthusiasts: New guy here, but longtime car guy (1st post). This evening, I'm going to check out a 2001 GT, and I recall (but not specifically) from my casual lurking here on the forum that there was a mid year change in the engine for the 2001 model year...... 1) am I right...

I have a bullitt intake setup. It comes with the intake, throttle body, alternator and bracket, idle sensor, coolant hose that runs under intake text me 214 986 0718 its the easiest way to reach me. will ship but buyer must pay aand i do accept paypal 700 obo

SOLD!

SOLD!

I'm either going with a 5.4 or Mach 1 swap into my GT, and it looks like I'll be picking up a Mach motor up this week. If I do get it, I'll be looking for somebody that has 4v Bassani headers wanting to trade for my 2vs. Lemme know! Ben