Ford Mustang Forums banner


  1. Windsor Engine Parts
    354" SBF Short block: 8.2 deck A4 Motorsports block, HTC 4340 crank, Eagle H beam rods, JE 9cc dome nitrous pistons, .700 lift Comp solid roller nitrous grind cam, Comp .904 Chrysler link bar lifters, all ARP hardware, 7 qt. pan with pickup, SFI balancer and flex plate, new rings, new bearings...
  2. Windsor Engine Parts
    Comp Cam Solid Roller Cam 260/254 @50 627/621 110 LSA Cam Card comes with it and is pictured as well. Cam has appx 500 passes. Lifters are Comp Endura X with appx 100 passes $400 plus the ride. Firm.
  3. Windsor Engine Parts
    I am looking for a nice set of 302 heads for my 347 build. I am really wanting Small Block Ford AFR 165cc but the first person to throw me a good deal will have a buyer. I am interested in all aftermarket heads! Send me pictures and description at 912 433 4261 - JD
  4. Windsor Engine Parts
    I have a new 410 inch sbf engine. 8.5:1 comp Block is a svo w block. Wet sump 9.5 deck. Never ran since new rotating assy and valves done. Shortblock built by Butler Performance.Cam, lifters, springs, belt drive, all have 20 1/8 passes or so. Been sitting in garage for a couple years. Eagle...
  5. Windsor Engine Parts
    Helping my buddy sell his block he picked up. Was going to build up the car but other life priorities took over so he's selling off his go fast parts. Dart Ford 8.2 Deck SBF Aluminum Block -4.030 Bore -Wet Sump -Std SBF Main Size -Std SBF Cam Size -Std SBF Cam Height -Will accept factory style...
  6. Windsor Engine Parts
    I've got for sale my Fluidampr Harmonic Balancer. It's 28oz and for Small Block Fords. New motor is zero balanced, it's the only reason for the swap. $150, will ship for free if you're in the southeast. Thanks, Scott
  7. Power Adders For Sale
    ATI Procharger Kit. It came off a 1995 mustang. Kit came off of a show car. It is a polished head unit,model 600b. The b designates a billet impeller so it will spin to higher rpm's more efficiently than the non billet impeller,therefore creating higher boost levels. There is no shaft play what...
  8. Electronics and Entertainment
    I have a few brand new, never installed MSD products that I will not be using. 1. MSD Distributor p/n 8352- $320.00 (paid $369.97) 2. MSD Blaster 2 Coil p/n 8202- $35.00 (paid $44.95) 3. MSD 6AL Ignition Box p/n 6420- $190.00 (paid $229.99) Feel free to ask me any questions. thanks, Matt
  9. Fuel System & Related
    I have a set of brand new never used Accel High Performance Injectors. They are 30lb Injectors for a Ford 302 or 351. They were too small for my build. My loss is your gain. They retail new for about 275. I am looking to get 250 shipped. PM me or call/text 8013618509. Link to them on american...
  10. 5.0/5.8 Engine Tech
    Who made these?
  11. Windsor Engine Parts
    Professional Products Hurricane polished intake. p/n 54031, New in box, single plane intake. $120.00 shipped plus PP fees Matt 219-789-8961
  12. Windsor Engine Parts
    For sale is this 331 SBF short block. The components are as follows: Block: Mexican 302 70 model, 2 blolt main, Poured, Girdled. Rotating Ass. Scat Forged Crank, Hbeam rods, arp bolts, Ross Nitrous Pistons-flat tops, King bearings and rings Accessories: JW wheel 157tooth 28oz, Durabond...
  13. Windsor Engine Parts
    TFS high port 225 heads fresh with new valve springs, stainless valves, and titanium lock. Heads were done by TEA I have flow sheet and receipt! These heads went low 8s on sbf 80mm turbo mustang Call 201-538-5487 $1999 with rockers!!!
  14. Power Adders For Sale
  15. Fuel System & Related
    I have for sale my AED 750 HO. I just pulled this from my 331 that I have for sale in another add. This is a great carb! Once I set it, never had to touch it really. It's only been off the engine two weeks and has always had race gas ran in it. It is complete with a fuel log with AN fittings and...
  16. Windsor Engine Parts
    I have for sale my 331 short block. It's the same engine used in my Signature. Specs are.. 1971 302 Mexican Block (studded, main girdle, poured) Ross nitrous flat top pistons Scat 4340 Steel Crank Scat HBeam 5.4 Rods King Bearings Durabond balancer Brass Freeze Plugs Double Roller Timing Chain...
  17. Windsor Engine Parts
    These were used for about five minutes on a dyno. They are in perfect condition, and were simply too short. Comp Cams 7754 6.400 .080 5/16 $110.00 Shipped These sell at Jegs for $135.99.
  18. Windsor Engine Parts
    I am changing my setup and have a short block that needs a new home. It contains: Factory 8.2 deck roller block machined and assembled by Pro Line Racing Engines. (Build sheet will be included) Main girdle with ARP studs Block is Hard-Blocked to the bottom of water jackets. Never ran over 190...
  19. Drivetrain Parts
    I have a J W powerglide bellhousing adapter for a small block ford $150.00 plus i will split shipping cost. Can send pics 859-414-4566 text only please.
  20. Power Adders For Sale
    Procharger D1X intercooled cog system. CSU 850 w/brpv. Procharger D1X kit off my 93 notch that did not sell. Comes with everything needed to install on a sbf carb set up. Looking to get 2k obo also have a CSU 850 BT carb with BRPV like new for 700.00 obo . Check out the youtube video of the car...