Ford Mustang Forums banner
rpm
1-17 of 30 Results
  1. Windsor Engine Parts
    Hey guys i'm going carb so I won't be needing these pieces. 500km on everything, came off a 347 sbf. -Edelbrock Performer EFI Intake Manifold Upper & Lower 3821 Comes with all hardware as well as gaskets. $600obo -BBK Cold Air Intake w/76mm c&L maf Comes with maf, all clamps, air filter...
  2. Windsor Engine Parts
    SOLD - SOLD - SOLD SOLD SOLD SOLD 351W EDELBROCK PERFORMER RPM EFI. SOLD SOLD SOLD
  3. Electronics and Entertainment
    SOLD!
  4. Windsor Engine Parts
    Looking for a used set of edelbrock performer rpm heads. Can be assembled or not. Lightly used and in usable bolt on condition. Heres the kicker, needs to be 1.90 intake not 2.02. Let me know what you got!
  5. Electronics and Entertainment
    Looking for a few MSD RPM pills for my 6BTM. Looking for a 2500 and 5200. let me know what you have!
  6. Windsor Engine Parts
    WTB - Edlebrock Performer RPM II Intake I would like to get a RPM Performer II intake. Please let me know if any one has one available. It will be for a EFI Setup, and have the intake as it came from edlebrock with no extra porting done. I would need it shipped to 48174 and if you PM let me...
  7. 5.0/5.8 Engine Tech
    For starters, my car isn't a mustang, but an old f100. However, I swapped the engine and 5 speed trans from a 91 mustang gt. I rebuilt the whole engine, put in an E303 cam, GT40 heads and intake, the heads have a performance valve job and are midly ported. I have 1.6 roller rockers and hardened...
  8. S197 Mustang (2005-2010)
    I have a 2006 FORD MUSTANG V6 PREMIUM Automatic. The car has no mods done to it. Recently I have been having some problems. Nothing shows up on Diagnostic Code Reader. While driving the car at times (once a week) the rpm is real high. 2.5k at 60 mph and 3.6k at 75 mph. I have to pullover and...
  9. 94/95 Tech
    I recently started having a problem with my idle surging to around 3000 rpm and getting stuck there. i havent messed with the idle or anything recently and it doesnt happen all of the time. when i shut the car off and restart the idle will go back to normal. what could be causing this? i...
  10. SVT & DOHC
    I have a 97 cobra, I'm sure it's every gear, I feel a pretty hard vibration underneath me like if its the transmission, it might not be the trans just trying to figure this out, it starts vibrating like around 6k rpm what could this be???? I need to get it fix I'm under the impression that its...
  11. 5.0/5.8 Engine Tech
    Long story short I have been patiently waiting to modify my 90 lx stanga. Being that I'm on a budet build it seems like takes forever .....I. have been picking up parts here and there tryin to wait til have all the parts in order to notice a differences/gain in hp. But 2weels ago curiosity got...
  12. GT & SOHC
    The tune I received from brenspeed set the idle at 800 RPMs. I feel like that is too high and the cams did not sound that great so I put it at 700 RPMs and it sounds really good. I'm just wondering if a lower RPM is hurting the engine in any way. I tried to research this on here before...
  13. 94/95 Tech
    Hey guys so here's the problem when i accelerate in my stang in first gear it feels rough like its not revving up smoothly.. i take it up to 3k and i wouldn't say the motor is shaking but it doesn't feel smooth.. its got 142k miles on it and i think its got the stock harmonic balancer.. could...
  14. Windsor Engine Parts
    I have a 351W RPM Air Gap Intake for sale. It's in excellent condition and was bought new last year. Only reason I'm selling it is because it's being replaced with a Victor Jr for nitrous purposes. I can do $165 shipped!! E-mail me at [email protected]
1-17 of 30 Results
Top