Ford Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 109 Results
  1. Mustangs For Sale/Wanted, 1994-1998
    This car runs & drives : Short video of it cold start & driving: For sale, a 1998 Mustang GT with following mods: -Momo Corse T Frame Racing Seats -Lowering Springs (Previous owner, I don't know how much) -3 inch Cold Air Intake -90mm Ford Lightning...
    $3,800 USD
  2. Mustangs For Sale/Wanted, 1987-1993
    What's up fellas? I am new to the forum. I am interested in purchasing a Foxbody notchback roller. 89-93, Automatic is my preference due to interior purposes. This will be my first build. I am located in Houston Texas. Looking for a good, clean, straight body if possible, no rust please. If you...
    $1 USD
  3. Mustangs For Sale/Wanted, 1994-1998
    95 Ford Mustang GT roller Project. Sitting on Weld Pro Stars. (New) Cobra R Hood. Don’t have time to finish, Too many projects. PLEASE NO TIRE KICKERS!!! $2700.00 OBO.
  4. Mustangs For Sale/Wanted, 1999-2004
    2000 Mustang Rolling Chassis - Original 6 cylinder Car 68,000 miles Griggs K-Member for a SBF Coil Over Springs with Strange 10 way adjustable struts Maximum Motorsports caster/camber Corbeau Racing Bucket Seats Cervini 2 1/2" Cobra R Hood OEM 2003-2004 Cobra bumper covers - front and rear...
  5. Windsor Engine Parts
    I have a NiB crane 449561 camshaft for sale. Gonna go ahead and have a custom one cut so this one is available. Retails in the 410ish range. Will do 275 on it. 563/584 lift and 232/240 @.050 on a 112 line if interested in pics shoot me a pm the other your # and I'll shoot all you want.
  6. Mustangs For Sale/Wanted, 1994-1998
    Pending Sale 7/18/18 INTRO: I have decided to sell my 1995 Mustang GT/Cobra clone as a roller. I have owned this car for over 12 years. It has been fun, but it is time to let it go. I have done a lot of work to the car, and it has been done correctly and with no expense spared. I know...
  7. Windsor Engine Parts
    Hey guys, i bought the wrong springs, duhh., New in the box. These are for good for most street strip hydraulic roller cam applications on most standard ford performance heads. 85 shipped Thanks, Paul 541-292-3800
  8. Windsor Engine Parts
    Looking for a more street friendly / stock converter friendly cam - bought a roller 5.0 with GT40P heads for a project and it's got a Z303 in there now and I want something small like a TFS 1, E303, etc. Needs to have a decent idle for power brakes and a slightly above stock stall converter...
  9. Mustangs For Sale/Wanted, 1987-1993
    ISO clean 87-93 notch roller, in or around Illinois preferred. Can be a 4 cyl or 5.0 car. Will travel within reasonable distance. Thanks
  10. General Mustang Tech
    Hey all, I've been out of the mustang world for a few years. But I've been looking for rollers locally and this one popped up on craigslist a few days ago. Body looks like it's in decent shape for the most part, it's a New Mexico car so more than likely little to no frame rust on it...
  11. Windsor Engine Parts
    Selling all 16 pushrods in used but good condition. Also selling a set of roller rockers that these came with. Message for a package deal. Pushrods: 302 289 347 351W SBF Pushrods 7 750" x 0 080 Wall 4711 5 16" 16 Pieces | eBay Roller Rockers: Ford 289 302 347 351W 5 0 Small Block SBF 3 8...
  12. Windsor Engine Parts
    Selling some pro comp roller rockers with poly locks in good condition. Selling the push rods separately. Will knock off a few bucks for corral purchase. Ford 289 302 347 351W 5 0 Small Block SBF 3 8 Roller Rocker Arms 1 6 Ratio | eBay
  13. 5.0/5.8 Engine Tech
    Propper way to build Hi all, I'm new to this forum, but I've worked on cars a lot and am fairly knowledgeable. My idea for this thread is for anyone who has started with a roller ( I just bought a 93 lx vert roller) and who can share any advice, tips, or tricks for starting with nothing. All my...
  14. Mustangs For Sale/Wanted, 1987-1993
    Looking for a fox coupe/roller in the SE. Im located in savannah Ga, but will travel for the right car. Let me know, thanks
  15. Windsor Engine Parts
    Ford Racing M-6564-B351 Roller Rocker Arm Set. New in box, never installed. $325 shipped to the lower 48. (over $400 new) PM me for fastest response. Thanks
  16. 5.0/5.8 Engine Tech
    RE: 1989 SBF 5.0L with TF stage 1 cam and TF roller rockers bolted to TF fac 170 heads, 6.7" C moly pushrods. After replacing the TF cam and all 16 lifters due to the incredibly loud ticking and lifter noises, I had a custom grind done from Ed. But it is apparent my motor has the dreaded...
  17. Windsor Engine Parts
    Crower SBF 1.6 ratio roller rockers, with poly locks. These have been ground for clearance for a different application, which in no way effects their performance. Used $275. By the way, they are 7/16's. Will ship, Paypal friendly, located Dayton-Cincinnati area. Thanks, Ken
  18. Mustangs For Sale/Wanted, 1987-1993
    I was going to do a terminator swap on my fox but, I've decided to use my SN95 instead. I fortified the body to handle the power so I will include a list of what I've done. Kenny Brown Matrix Subframes Replaced portions of the floor pan to remove small rust holes. plated and welded the upper...
  19. Mustangs For Sale/Wanted, 1979-1986
    '84 Mustang GT - Drag Roller email: [email protected] Cell# 814-979-6718 Body is rust free. Undercarriage all sandblasted and finished with POR-15 with topcoat. Cervini's Storman Norman hood, custom heavy duty subframe connectors, torque boxes welded and reinforce with Wild Rides Battle...
  20. Windsor Engine Parts
    Up for sale is a Lunati billet roller cam. It is a retrofit roller that will work with non-roller as well as roller applications. It will also work with fuel injection or carbureted engines. Likes nitrous and small blowers. The cam has appx. 1000 street miles on it. The cam itself is in near...
1-20 of 109 Results