Ford Mustang Forums banner

rear disc

  1. Handling
    So, after 2 years I finally found the balls to start upgrading my 89 LX hatch. Going to use this on twisties, and I live in California, so engine upgrades are basically out the window. Engine upgrade-wise, most I plan to do is add a supercharger or hopefully a CARB-legal twin turbo kit meant...
  2. General Mustang Tech
    Hey there everybody, I have a question about rear disc/proportioning valve setups. I swapped in a turbo coupe rearend into my 1990 GT and am looking at the whole proportioning valve issue. I have noticed that I can get a 94+ proportioning valve substantially cheaper than one for a 1990. Also...
  3. Miscellaneous Mustang Parts
    For Sale is my USED rear-brake kit and c-clip eliminators. This kit will not utilize your E-Brake, renders it useless. Sorry. This kit also requires Strange Axles as per stranges website. This is a nice upgrade for someone with an 8.8. Stops really well. Both brakes and c-clips...
  4. Wheels and Tires
    Hey all, I just put a T-bird Turbo rear end in my 1990 GT and have now gotten confused when looking at wheels. After bolting the new rear end into the car, it is a bit wider than the stock one (which I new going into it). It also seems to stick out a bit to the passenger side (not a crazy...
  5. Mustangs For Sale/Wanted, 1987-1993
    ALL PARTS LESS THAN 6,000 MILES!!!!!!!!!!!!!!!!! Interior UPR carbon fiber trim kit UPR billet door handles UPR billet window switches UPR billet heater controls UPR billet gauge trim UPR billet shifter trim UPR billet tilt lever UPR billet switch plate for ash tray Steeda billet 4 pc. pedal...
  6. Suspension
    I am looking to buy a turbo coupe 4 lug rear disc brake setup for my 1990 gt. I will need everything for the conversion. I am not interested in swapping the whole rearend, just the brakes. Thanks.
  7. Suspension
    Ordered the wrong part, I needed GD7024 for the Cobra and mistakenly order GD7023 for the GT. My loss is your gain! These are $150+ new from Summit They have 10 miles on them, just enough to remove the coating where the pads sit. $100+ship Rotor Construction Solid Rotor Style...
  8. Suspension
    i have a rear 4-lug disc brake kit for a TC/COBRA heres the parts list: -i have BOTH the TC brackets and the fox length axle brackets from Northern Race Cars. -right and left calipers -right and left brake hoses -2 rear rotors -wagner brake pads everything is NEW, calipers are painted with...
Top