Ford Mustang Forums banner

project

  1. Mustangs For Sale/Wanted, 1979-1986
    1985 Mustang notchback roller for sale,no motor or trans or front seats.Otherwise complete car,has 8.8 rear,nice 10 holes with 2 new tires,5spd car pedals still in.Manual windows and locks,newer black carpet.Body is overall solid and in grey primer.I do have motors and transmissions available...
  2. CJ Pony Parts, Inc.
    What's more exciting than a brand new Mustang build project? CJ Pony Parts is now introducing its new project Mustang, appropriately titled "Forgotten Fastback." This 1965 Fastback may have been forgotten by the world, but CJ Pony Parts won't leave it by the wayside. We'll be working...
  3. Mustangs For Sale/Wanted, 1987-1993
    88 Mustang Gt (project) Unfortunately I have to sell my project. I got some financial situations that have arisen. Now to the car its a 88 gt pretty much stock. Has a fresh stock 5.0 in it with 0 miles on rebuild, new piston rings, bearings, seals ext. Stock heads,pistons,crank,cam. Stock world...
  4. Blog
    COMING SOON The Next Project Front Suspension... Ok everyone Just a little heads up Getting ready to start the front suspension UPR tubular K Member, A Arms, and Coil Overs (Eibach 12-250 Springs),and New Tokico HP blue Struts, bump steer kit, and 4 bolt Caster Camber plates, Also Should be...
  5. Other Fords and Trades
    *SOLD* the body, search for my other threads created for the parts I have left. Thanks! I have a new car now and planned on finishing this one but it has just been sitting for the last year so it would be best to let it go. I will trade for a 4x4 truck, another car, boat, guns...try me. Or I...
  6. Mustangs For Sale/Wanted, 1987-1993
    Howdy all, After the turn of the year, I'm looking to get a donor car for the Factory Five Racing Type 65 Coupe. The car does not need to look pretty at all. Moderate rust is understandable and acceptable. Would very much prefer a running vehicle, but since the engine is going to be pulled and...
  7. Mustangs For Sale/Wanted, 1987-1993
    1990 lx hatch roller/project trades considered sold
  8. General Mustang Tech
    figured it was time to create my build thread little about the car, i have had it for 5 years and i have been changing and spending as much as i was the day i got it. the day i bought it after a good clean and wax i than got the drag racing bug launched pretty hard with the 5 spd c...
  9. Advertiser's Showcase
    The Screaming Eagle, Part 1 of 2 - RACE PAGES AUGUST 2009 We follow along as Coast High Performance Assembles one of their Pro-Street Shortblocks for “WARHORSE” *Click here to view full article online with imagery and descriptions In the world of small-block Fords, there are a...
  10. Mustangs For Sale/Wanted, 1999-2004
    Just bought an 03 cobra wrecked. Looking for clean roller body. Just need a shell Would love to find a 99 cobra, 01 bullitt or a v6 with a saleen package on it Email [email protected]
  11. Mustangs For Sale/Wanted, 1987-1993
    I'm selling a project car I bought about 2 years ago. It's a 1990 Mustang GT convertible. It has the original 5.0 engine, automatic transmission, and about 74,xxx miles on it. Exterior: Marble blue/black paint; needs some minor body work and paint. Interior: Grey tweed, very clean. No lean...
  12. Mustangs For Sale/Wanted, 1979-1986
    Itching to get back into a fox body. Needs to: Have a title Clean chassis (no rot, no holey towers, preferably solid floors) Full interior (even if its a little beatup) or close to it (not worried about seats) Straight body (no crimped quarters or the like) Looking for a TTop car preferably...
  13. Mustangs For Sale/Wanted 1978 and older
    Bought this baby from a repo yard a couple years back, stripped it, halfway through the rebuild, and now I'm just too busy, so its got to go. 66 Coupe, swapped in a rebuilt 302. Comp street cam, Eagle pistons, edelbrock intake, some minor head work, etc attached to a fresh 4-speed. The whole...
Top